Join Maker Studios! Click here to see if your channel qualifies for RPM Network/Maker Studios: http://awe.sm/fH83N Dirty job!
Join Maker Studios! Click here to see if your channel qualifies for RPM Network/Maker Studios: http://awe.sm/fH83N Dirty job!
You must be logged in to post a comment.
){kind=link}
If Peugeot mechanics in my country, would work like you do, i would let my 407 on their hands.
Can`t remember.
hello that music is Narcoleptic, but who plays it?
All what I used in this service station was original(Peugeot, Citroen) sometimes Bosch.
what brakepads brand do you recommend?
You’re welcome.
Just did the disks and pads on my 407 SW, right in front of my house on the driveway, took me 2 hours (90min for the first, half an hour for the second) and surely saved me a lot of money! And my boy learned a little bit, too! And if it’s just the fact, that DIY is not just for mechanics and alike? So thx for the video, mate!
Here you can use even a bench clamp to push pistons back in. Rear axle brakes needed rewinding, depends on what brake type and clockwise. Thanks for watching!
Really helpful video, i am going to do the discs on my 407 SW Estate, i believe i need a brake caliper rewind tool…can you tell me what way the pistons rewind back in, as i believe the tools are handed. Thanks
Spray is a ceramic grease and this another stuff is a technical vaseline. Thanks for watching!
Thanks for the upload, Going to give this a go.
What is the spray you are using? And whats the stuff you put on the caliper bolts?
Cheers
Replacing brake pads and disc Peugeot 308