Removing the fuel rail and fuel injectors from my 1989 Oldsmobile Cutlass Ciera (3.3 L V6).
Fuel Injector Replacement on a 1989 Oldsmobile Cutlass Ciera (3.3L V6)
652
Like
Save
')){kind=link}
- Tags:
1989, 3.3L, Ciera, Cutlass, Fuel, injector, Oldsmobile, Replacement
- Categories: Oldsmobile
Comments
Comments are disabled for this post.
Take off the vacuum howse.
One of the easiest (motors) cars to work on.
I am trying to replace the throttle position sensor. part of a screw is still stuck in the hole. of course the harder one to get to. Any advice on how to get the piece of screw out? there's just hardly any clearance. I tried a few different dremmel heads but cant get directly under it so I'm not getting anywhere I'm totally irritated with myself for not replacing it last time I had the thermostat replaced. I had to get a professional to do it. The last mechanic to do the thermostat must have used an impact wrench. I need help!!!
I found online an easy way to check the injectors. A super long screwdriver used like a stethoscope. you can hear the tapping and if it is irregular, its not working right. I had 3 bad injectors and I tested them when I took them off and the volt meter confirmed they were bad. They are cheap enough to replace them all. I have more questions though….I will make another post