Amazon links to parts used in this video:
Bosch QuietCast Premium Ceramic Brake Pads – https://amzn.to/2VfIXPl
Detroit Axle Front Rotors 2 Pack – https://amzn.to/2UQ0duS
Permatex Brake Parts Lube – https://amzn.to/2Gu4cmP
Brake Cleaner – https://amzn.to/2GD9ZIe
In this video, I show you how to replace the brake pads and rotors on this Nissan Juke. Let’s get to it!
){kind=link}
Nice video, I always say I'm going to make one but never do. You've helped a lot of people out I'm sure of that.
I have a 2016 juke I’m going to assume same process.. question tho when changing the pads do you have to replace the shimmy’s ?
I’m going to do my breaks soon and thought you had to “bleed” the breaks. You didn’t mention that. I am just wondering what that is?
NOTE: ***THE BRAKE PADS AND RETAINER CLIP ARE INSTALLED INCORRECTLY**** Chad, at 10:25 seconds in the video, the metal tab that you are folding over is incorrect. That metal tab is supposed to fold into the brake wear indicator. In your video, the wear indicator is on the bottom of the pad, which is the wrong position. That means you have the pad on the wrong side of the caliper because the wear indicator needs to be on top. That metal tab on the shim goes on the inside of the wear indicator and it is used to pull the pad away from the rotor when your foot is off the brake. How did I know this? I tried to install the brakes the way you stated in your video and the metal tab would not stay in position. When I got to the other side of the car, I paid attention to where the metal tab was located and I had to redo the first wheel.
Wont pressing the caliper back to the shut position cause the brake fluid to rush back to the brake master cylinder causing it to overflow, or possibly blowing the cap off?
12:44 now he's working
This was a big help. Thank you for taking the time to film it.
This was a perfect how to video, but you should have hit the calipers and the Center of those rotor's with some Black or Red Brake Caliper paint. Just some icing on the cake..
This is awesome.Thanks for the great vid!
Where are you placing your floor jack and stands? The inter-webs have not given great guidance on this.
very well explained and very easy to follow. would like more like this easy.Wanted £345.00 at dealer and local wanted £160.00. Done it for cost of parts £65.00. took hour and half time well spent.
thank you
What size of vice-grip for pushing the caliper back in?
I have a question my brakes are clicking at any speed no matter if I’m going straight or turning and my brakes feel loose like I can move them around any quick fixes