Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ia/1ASFK02469
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 09, 10, 11, 12, 13, 14 Nissan Murano
🔧 List of tools used:
• 14mm Wrench http://1aau.to/onX/1AXAA00010
• 15mm Wrench http://1aau.to/onX/1AXAA00010
• 16mm Wrench
• 15mm Socket http://1aau.to/oXu/1AXAA00015
• 16mm Socket http://1aau.to/oXu/1AXAA00015
• 21mm Socket http://1aau.to/opR/1AXAA00043
• Channel-Lock Pliers http://1aau.to/oaZ/1AXAA00139
• 1/2 Inch Breaker Bar http://1aau.to/ojy/1AXAA00078
• Ratchet http://1aau.to/oact/1AXAA00016
• Socket Extensions http://1aau.to/oXu/1AXAA00015
For More Info visit us at http://1aau.to/h/a3S/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Being truthful here, spraying that with wd40 and alliwing it to penetrate would shorten disassembly time. Use antiseize before reinstalling on threads.
Get it Sue!!!!
Good video …these links are usually difficult…what kind of snap-on locking pliers did you use …. I would like to get a pair of those