How to Replace Rear Brakes 09-14 Nissan Murano

How to Replace Rear Brakes 09-14 Nissan Murano

Buy Now!
New Brake Kit from 1AAuto.com http://1aau.to/ia/1ABFS00465

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to the 09, 10, 11, 12, 13, 14 Nissan Murano

🔧 List of tools used:
• 10mm Wrench http://1aau.to/oae/1AXAA00010
• 14mm Wrench http://1aau.to/oae/1AXAA00010
• 19mm Wrench http://1aau.to/oae/1AXAA00010
• 14mm Socket http://1aau.to/oc7/1AXAA00015
• 19mm Socket http://1aau.to/oau/1AXAA00043
• 21mm Socket http://1aau.to/oau/1AXAA00043
• Wheel Lock Key
• 1/2 Inch Breaker Bar http://1aau.to/oY/1AXAA00078
• Torque Wrench http://1aau.to/oaR/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Rubber Mallet http://1aau.to/oj/1AXAA00413
• Wire Brush http://1aau.to/ox/1AXAA00079

For More Info visit us at http://1aau.to/h/jG/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

18,881
Like
Save


Comments

1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
Do it Yourself
Save Money

Blake says:

I noticed that you opened the brake bleeder valve. I this required or not necessary? And if is necessary, why?

Curt Floyd says:

Hi, i have a stuck rotor. Does this also work for 17 model or does the 17 have a hidden screw to hold the rotor?

Tom’s Video Collection says:

My only other question is, it’s not easier to take the cap of the master cylinder instead of opening the bleeder screw? Just curious.

Tom’s Video Collection says:

Are the 2014 Pathfinder brakes the same way? I could not find a video.

Ana Hernandez says:

Great video!! What’s the size of the bleeder screw?

The God King says:

Will this work for a 2017?

Alex Clary says:

This is the most thorough brake job I've ever seen. Not just on youtube…….ever.

MODS FOREVER says:

wonderful video but shops aint doing none of that they getting the car in and out slinde the pads in and out and push the piston in and they sending the car on the waygreat video though once again.

htnotc says:

Thanks for this tutorial video. You make it look so easy! Keep up the good work.

Quick question: Do you know think any Nissan dealer can do this within 2 hours of labor? I'm thinking about buying those Nakamoto break pads and rotors then asking my dealer to install them. Asking me 1K for the brakes/rotors and labor is just insane!

Ronaldo Marcelino says:

Thanks for the video it helpful a lot,my question is,even in the front brake the slide pin with the rubber boots goes on top?

michaelssong87 says:

You say not to add grease/silicone paste to the top of the retainer clips for the rear brakes? Is that only the recommendations on rear brakes? Many people add greaseor paste to the front pads.

JJ says:

Thanks for the great video, I'm about to do this to my car. Do you recommend coating the back of the brake pads with CRC Disc Brake Quiet? I used this on my F-150 and seemed to eliminate the squeaks.

iver92975 says:

I'd love to work and have that shop it so clean!

Comments are disabled for this post.