https://www.1aauto.com/2012-nissan-rogue-parts/y-mo/2012-1391?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=vfp_C5r–p8
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 12 Nissan Rogue
🚗 The video is applicable to 2012 Nissan Rogue
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
I made a video for this same job same vehicle.. I did not have to remove the ball joint from the spindle. I dont reccomend doing it that way as its more difficult. Its easier to remove the spindle from the struts with the 2 21mm bolts. They always come loose and no it does not require an alignment when you reassemble. awesome video by the way.
Trying to find the axle boot for the drivers side inner. Is it the same as the one installed in this video? Can you please post the part number for it since I can''t find it on the 1A Auto site.
My.mechanic changed boot axle and bracket car had 73000 miles on it bill was 585 tried to get a little help from nissan they didn't care
If my mechanic does the repair next week as well as you did I'll be a happy camper….until I get the bill of course.
Looks like a new axle in the re-assembly.
how many times did you change gloves?!
How much was that job?
how to remove a steering wheel from a cavalier 2004