https://www.1aauto.com/2002-06-nissan-altima-wheel-bearing-and-hub-assembly/i/1ashr00105?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=n85Uc2EkWV8
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning wheel bearing hub. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ASHR00105
1ASHS00396
TKSHR00029
TKSHS00068
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• Pry Bar
• 14mm Wrench
• 17mm Wrench
• 19mm Wrench
• 21mm wrench
• 14mm Socket
• 17mm Socket
• 19mm Socket
• 21mm Socket
• Dead Blow Hammer
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels
• Rust Penetrant
• Center Punch
• Floor Jack
• Jack Stands
• Wire Brush
🔧 Instructions:
1. Removing the Wheel 0:17
2. Removing the Brake Pads 0:46
3. Removing the Brake Rotor 4:33
4. Removing the Hub 5:42
5. Installing the Hub 9:32
6. Installing the Brake Rotor 6:13
7. Installing the Brake Pads 11:28
8. Installing the Wheel 19:10
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
If you painted break pads cover but your working very good
very helpful
Whats the torque spec on back 4 bolts on wheel bearing???
Great video with good use of a GoPro/camera for the inside views. Great tutorial and extremely easy to follow!
What a rust bucket
If you remove the cap off the brake Reservoir it makes it a lot easier to move the brake caliper also because these vehicles are prone to rust and bolts snapping easily make sure to use penetrating oil on all the bolts a couple days before you plan on doing this that will make it a lot easier. Good video
This is the best video for wheel bearing replacement… thank you.. soo much…
You guys deserve at least 1 million subscribers