How To Replace Headlight Assembly 2008-2013 Nissan Rogue

How To Replace Headlight Assembly 2008-2013 Nissan Rogue

Buy Now!
New Headlight Assembly from 1AAuto.com http://1aau.to/ia/1ALHL02188

Over time, headlight lenses become dull and hazy. You’d be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2008-13 Nissan Rogue.

• Check here for more videos on the 2008-13 Nissan Rogue: http://www.youtube.com/playlist?list=PLJVpHWuCEUX8_YYAfxq2hHkD2Ur6xuGXZ

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• 10mm Socket http://1aau.to/oa/1AXAA00017
• Trim Tool Set http://1aau.to/oa/1AXXX00006
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Nissan Rogue 2008-13 1st Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8_YYAfxq2hHkD2Ur6xuGXZ

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

57,705
Like
Save


Comments

@TRQ says:

Watch the Video

Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

Do it Yourself

Save Money

@stephenlambert392 says:

If you don't have a lift you don't need to take the bumper off. Just pull the grill off and the top row of retainer clips. More than enough room to do the job.

@slumpgod593 says:

All that just to
Change a headlight wtf Nissan lol

@Rhinodriver says:

Thanks bro!

@brandonplank4233 says:

What adjustment do you make with the headlamps ?

@elgrancabron says:

Great video! Clear, concise, and right on the money. I had to do this on an Altima I have. I liked the results so much I wanted to do it on my Rogue. Even though I've worked on Nissans before, your video saved me a lot of hunting around for bolt locations and techniques for pulling off bumper cover without breaking anything. Thanks again for taking the time to put this video together. I know it takes time to do it right like you did!

@djfastfreddy8949 says:

Hey are all the mounting bolts in this video the same size?

@clayton9136 says:

Remove it from the VEARIKUL

@bravehearted01 says:

Is there one for 2015 rogue?

@chazb8948 says:

Thanks for the video tutorial, that is a little too much to do, I just got mine fix after a deer jumped to my driver side of the car and damage the Roguethey replace the headlight on the driver side but didn't replace the other one, after I told them to replace it if the other one was bad, I was going to pay for it. I may give it a try. One thing they didn't replace the screw that hold the cover for the fog lights at the bottom. Umm? Need to find the part for them and need to get the serial number for the screws for the fog light cover. thanks!

@dougdrefus4274 says:

if your only doing one side do you have to take the bumper completely off? Can i sqeeze the headlight assembly out one side without taking the whole bumper off

@donhai1919 says:

just like a dang 2000 honda accord. thankfully most of my vehicles dont require an engineer degree. But it does look easier than a honda

@stevencubert9573 says:

Driving side different

@tigerlaurah says:

Thank you for the tutorial. I quickly and easily changed mine out.

Comments are disabled for this post.