How To Replace Front Wheel Hub Bearing 2014-2020 Nissan Rogue

How To Replace Front Wheel Hub Bearing 2014-2020 Nissan Rogue

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ia-1ASHF00562
New Wheel Bearing & Hub Assembly Set from 1AAuto.com https://trq.video/ia-1ASHS01275

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2014-2020 Nissan Rogue.

• Check here for more videos on the 2014-20 Nissan Rogue: http://www.youtube.com/playlist?list=PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ

This repair was done on a 2015 Nissan Rogue S 2.5L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2014 Nissan Rogue
2015 Nissan Rogue
2016 Nissan Rogue
2017 Nissan Rogue
2018 Nissan Rogue
2019 Nissan Rogue
2020 Nissan Rogue

Tools you will need:
• Pry Bar https://trq.video/ozH-1AXAA00020
• Brake Caliper Hanger https://trq.video/ofc-1AXAA00439
• 3/8 Inch Impact Gun
• Socket Driver
• Swivel
• Torque Wrench https://trq.video/o3m-1AXAA00044
• Rust Penetrant
• Center Punch https://trq.video/ohs-1AXAA00055
• Floor Jack https://trq.video/oEQ-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oCC-1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Nissan Rogue 2nd Generation 2014-2020: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

80,798
Like
Save


Comments

@TRQ says:

Watch the Video

Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

Do it Yourself

Save Money

@stephensandor5072 says:

Great Clip…Very Very good

@Terrorbyte75 says:

What type of impact wrench is best for this type of job?

@craignelsen3740 says:

Great video!!! Great clear concise camera angles no jibber jabber perfect

@Billyargueta289 says:

Head light on 2017 rogue went out and it's not the bull. Can anyone help with location of fuse? Thank you

@southernspeedsolutions2845 says:

1:48 "bonk"

@EricNelson-b5h says:

Biggest question I have on this is how to figure out which side it is! The sound is so loud that I cannot pinpoint the side at all. I have wobbled both front tires and it was easy on my Toyota‘s to figure out what side it was but I have no clue.
Can anyone help me with this?

@JamesNewman-cq9lw says:

Why would you add thread locker to the mounting bolts??? Just curious?

@nabilbouziane1269 says:

Will this work for a 2023 Nissan rogue?

@MrSensibleman says:

Great video. Right to the point and short and concise. Thanks for the torgue specs.

@CharlieGPS1981 says:

my 2020 sentra sr has pressed front wheel hub assembly

@nlmbmunoz7930 says:

What’s the size of the 4 mounting bolts? Never said it

@trevormccleery6070 says:

"Give it a loving bonk" 10/10

@BarbaraBartosh says:

Do we have to use pneumatic tools or can we go old school?

@maliqdepina7340 says:

Anybody else have trouble actually getting to the mounting bolts?

Comments are disabled for this post.