Car Fix DIY Videos

Buy Now!
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00973

This video shows you how to install new TRQ outer tie rods on your 2011-2017 Nissan Juke. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2014 Nissan Juke Nismo RS 1.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Nissan Juke
2012 Nissan Juke
2013 Nissan Juke
2014 Nissan Juke
2015 Nissan Juke
2016 Nissan Juke
2017 Nissan Juke

Tools you will need:
• Pry Bar https://trq.video/oakM-1AXAA00020
• 17mm Wrench https://trq.video/oauc-1AXAA00010
• 14mm Socket https://trq.video/ocDG-1AXAA00015
• 21mm Socket
• Ratchet https://trq.video/ocDV-1AXAA00016
• Torque Wrench https://trq.video/obES-1AXAA00044
• Gloves https://trq.video/obVy-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaXa-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaIK-1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.