Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://www.1aauto.com/*/i/1ASFK00773?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=99BGtjYyYDw
1A Auto shows you how to repair, install, fix, change or replace loose, worn, or control arms. This video is applicable to the 09, 10, 11, 12, 13, 14 Nissan Murano
🔧 List of tools used:
• Pry Bar http://1aau.to/t3/1AXAA00020
• 21mm wrench
• 18mm Socket http://1aau.to/tdR/1AXAA00043
• 21mm Socket http://1aau.to/tdR/1AXAA00043
• Pickle Fork
• 1/2 Inch Breaker Bar http://1aau.to/tas/1AXAA00078
• Torque Wrench http://1aau.to/tcn/1AXAA00044
For More Info visit us at http://1aau.to/h/ED/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
You guys always get the parts that are not rusted or corroded into place. Always nice shiney no problem parts.
at 11:44 time stamp there is a nail in the tire! Might want to check that out if not done already!
Most of your videos usually begin with a screen that displays what tools you will need before getting started. That is very helpful.