Buy Now!
New Brake Kit from 1AAuto.com http://1aau.to/ia/1ABFS00828
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 08, 09, 11, 12 Nissan Rogue.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oYR/1AXAA00013
• 14mm Socket http://1aau.to/oPs/1AXAA00015
• 18mm Socket http://1aau.to/om3/1AXAA00043
• 19mm Socket http://1aau.to/om3/1AXAA00043
• 21mm Socket http://1aau.to/om3/1AXAA00043
• Slip-Joint Pliers
• 1/2 Inch Breaker Bar http://1aau.to/ohE/1AXAA00078
• Ratchet http://1aau.to/oZ9/1AXAA00016
• Socket Extensions http://1aau.to/oPs/1AXAA00015
• Torque Wrench http://1aau.to/oqa/1AXAA00044
• Bearing Grease
• Brake Parts Cleaner
• Bungee Cord
• Floor Jack http://1aau.to/ooB/1AXAA00068
• Jack Stands http://1aau.to/ooL/1AXAA00065
• Wire Brush http://1aau.to/oc9/1AXAA00079
For More Info visit us at http://1aau.to/h/aI9/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
lock-tite anti seize on the bracket bolts?
Yo le hubiese puesto unos caliper nuevos o los hubiese pintado a la verdad están muy feos para ese año
That hole in the caliper is for a bar so you can push your piston back in before you take the caliper off.
Thank you. This was very informative and very easy to digest.
How much does it usually cost to replace them front and rear pads and rotors? How long it takes to replace them usually?
Thank you so much , that was so complete , you're the best.
Definitely a northern state car. Snow and salt.
Great video! I got all for of my brakes done on my 2011 Nissan Rogue today in 4.5 hrs with the recommended break-in procedure.
I noticed that I only had to remove 1 screw on the bracket. The top screw had no threads and seemed to only act as a pivot. I hope I didn’t screw it up. It seems to stop great now!
Thank you! I saved a decent chunk of money. You are "liked"!
Do you have a video for a 2015 Rogue front brake pad replacement? The orientation of the pads is different, and there is a spring that you don't talk about in this video.
looks like massachusetts rust to me
Brakes grinding after replacing pads and new rotors on 2011 Rouge. Not sure whats the problem.
How do I know if my break pads and rotors needs a replacement?
Are there torque specification for the calipers?