http://www.1aauto.com 1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number…
http://www.1aauto.com 1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number…
You must be logged in to post a comment.
You may need to swap the wire harness from the old door into the new door
(if it’s possible). Hope this helps you out. Have a great day! 1aauto.com
888-844-3393
It should be just like the drivers side. 1aauto.com 888-844-3393
Awesome thanks do you know how to adjust the door open rod that slids into
a plastic houseing and it came off. so you cant open the door from the
outside.
Thanks that was very helpful
Thanks, very helpful video. I am going to be replacing the drivers side
mirror on a 2012 Sentra, do you know if the steps are pretty similar?
Usually there’s no adjustment on them. They typically attach to the door
handle. You could remove the door panel on the other side of the car to see
how it attaches to the handle if you are unsure. Hope this helps you out.
1aauto.com 888-844-3393
Thanks for the info do you know if putting back the door handle rod is
easily accessible for the passenger side?
i will try i tried last night but its too dark. wen you open the door from
inside the plastic piece slides down and opens the door. but on the outside
the rod pushed the plastic down but if the rod tip isnt in the hole it
slips and pops away. Thanks
I brought a 2005 Nissan sentra door and i have a 2001 4 door but I’m having
problems with the switch now I noticed that the door I purchased has 3
plugs and I have 2?? Any help is this door compatibile? Please n thank you
PS this is the driver door
The steps are similar but of course because of the body styling changing
since then, the bolt position and the attachment hardware will be different
but the concept is still the same.