How to Install Replace PCV Valve 02-06 Nissan Altima

How to Install Replace PCV Valve 02-06 Nissan Altima

In this video, 1A Auto shows you how to repair, install, fix, change or replace a failing, worn out, or defective PCV valve. This video is applicable to the 2002, 2003, 2004, 2005, 2006 Nissan Altima.

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tKX/1AXAA00013
• 10mm Socket http://1aau.to/th2/1AXAA00017
• Ratchet http://1aau.to/tjs/1AXAA00016
• Socket Extensions http://1aau.to/tnV/1AXAA00015
• 5mm Allen Wrench

For More Info visit us at http://1aau.to/h/Do/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

72,907
Like
Save


Comments

1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
Do it Yourself
Save Money

Not today says:

Hi, is there any possibility that stuck open pcv valve suck air instead of exhale air?

karwan salih says:

My Nissan micra k12 almost stall at idle .. could be bad pcv valve ? Thanks

karwan salih says:

My Nissan micra k12 almost stall at idle .. could be bad pcv valve ? Thanks

Miguel Rosales says:

excellent video, is it the same valve pcv and ocv?

SunnyDays says:

If the mouth of the pcv hose broke, and the clamp won't go up to it's original spot when we place it on the valve. Is the only fix to replace the hose? And if so, do you have a video of how to do that?

Taylor Nichol says:

I'm mad at how annoying this looks to do. It could be so much easier Nissan!

azaryah yasharahla says:

can the pcv valve on a 03 nissan xtrail be replaced

Cesar Camacho says:

Nissan Altima 2010 it's same

Rickbluelake says:

Thanks for keeping the camera steady. Most of these DIY can't figure out how to operate the camera and don't even train the camera on the spot they are supposedly showing. Perhaps you could do a video on how to make a DIY video 🙂

Efstratios Diakoniarakis says:

Excellent presentation !!!! … Thanks !!!
In what area is the pcv valve in the 2016 Altima ???…Same area ???

celestin changle says:

Do you know where the pcv valve is on a 2007 Nissan morano

Falcon Three says:

Page 1-39 say —-chilton book———-pull valve from the grommet from valve cover do not do this , you will need a 23mm wrench it has threats
It is in a stuff place-remove clip push on hose with a board . This is for Nissan 2006 frontier 4.0

Falcon Three says:

How do l remove a pcv on a 2006frontier le v6

TheRebuilt1 says:

Thanks for posting but I wish some of your Altima/Maxima videos would tackle the more involved 3.5 engine as you guys always post for the easier car to work on which is the 2.5 I-4….

Ivan Amador says:

Is similar in 2003 Altima 3.5?

Keith Walburn says:

Thank you for this helpful video. Don't think I could have replaced it without this video. I replaced my Jimmy PCV in about 30 seconds and my Grand Prix in about 5 minutes. The PCV process for the Altima was way more complex than I have encountered in the past.

Kevin Montrond says:

I can't find the item for this vehicle on your site, I've tried the link and had no luck.

Discordio says:

What is the type of hose the connects to the PCV valve?
I tried looking it up but couldn't find it.

John lim says:

what is symptoms of bad pcv valve?

Julie says:

Maybe a stupid question, but do I need to disconnect my battery for this? Also, do I need to disconnect my battery when changing my spark plugs or coils?

Comments are disabled for this post.