https://www.1aauto.com/nissan-altima-rogue-sentra-cv-axle-shaft/i/1aacv00167?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=ed4yVRcm81k
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 07, 08, 09, 10, 11, 12 Nissan Rogue
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1AACS00112
1AACV00166
1AACV00167
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• 15mm Wrench
• 16mm Wrench
• 19mm Wrench
• 21mm wrench
• 10mm Socket
• 13mm Socket
• 16mm Socket
• 19mm Socket
• 21mm Socket
• 32mm Socket
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Bungee Cord
• Transmission Fluid
• Center Punch
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Rubber Mallet
🔧 Instructions:
1. Removing the Wheel 0:55
2. Removing the Hub Nut 1:31
3. Removing the CV Axle Shaft 2:53
4. Installing the CV Axle Shaft 6:13
5. Installing the Rotor and Axle Nut 8:17
6. Reattaching the Wheel 9:31
7. Refilling the Transmission Fluid 10:10
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Do y'all have a video that show the steps in changing a rear diff in this model vehicle?
Just out of curiosity, what would be the average cost to just hire a mechanic to do this job? My rogue has a torn/leaking boot- just discovered this today on my garage floor. Am I okay to drive it for a few days like this?
You guys make the best videos out there, thank you! All the guys in the videos are very thorough and competent, great job guys, thanks!
Dear 1A Auto Parts,
Thank you very much for this informative, easy to follow tutorial. My husband just replaced the same axle on our Rogue, and he was following this video while he did it, and saved us $932 that the dealership quoted us. He actually had a much easier time of it; he didn't have to beat it out with a prybar and hammer, probably because we live in Arizona where it's dry almost year-round, and parts don't get corroded in place in wetter locales. He told me to tell you he hadn't heard of 1A Auto before, but he's going to make it a point to buy parts from you in the future. Thanks again!
I noticed other videos mark the two bolt positions before removing from the strut plate to prevent a need for re-alignment. Is this not important?
I have a question. I have the same car same year. And the CV axle you pulled out was longer than the one you guys have one sale? I don't understand