http://www.1aauto.com/1A/fog-lights/Nissan/Maxima/1ALFP00064 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped…
http://www.1aauto.com/1A/fog-lights/Nissan/Maxima/1ALFP00064 1A Auto Shows you how to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped…
You must be logged in to post a comment.
It may be a similar procedure. 1aauto.com 888-844-3393
In a small housing like a fog light it is normally recommended to use a 35w
HID.
ok thanks
Thank you i was about to try to do it from the bottom and this was MUCH
easier.
Thanks for checking us out. Have a great day. 1aauto.com 888-844-3393
1aauto. You may happen to know. If i put hid’s in the fog lights, can i use
55w, or do i have to use 35w?
Thank you so much, this video was immensely helpful.
Help plz I got a nissan altima 2011 trying to install fog lights and hid
lights any idea how to do it????
Your video on the fog light replacement was a HUGE help over this past
weekend. Replaced both fog lights on my 2000 Nissan Maxima GLE and your
instructions worked like a charm. Very easy replacement. Thanks so much for
posting this!
You may want to ask the manufacturer of the HID kit to see what they
recommend on your vehicle.
@louisalcha I don’t have this car to look at so I am not sure. Often
vehicles are wired so you could install the switch and the lights. Look to
see if there are harnesses tied offf to the frame where the foglights
should go. If there is then that is what you need to do. If you can’t find
the harnesses then the car is probably not wired. You could install the
lights then wire an aftermarket switch in that case.
Thanks saved me a ton of head scratching!!
I have a maxima 2000 GXE but without origins foglifht. can I put them with
out a new wires cause i dont have the foglight button on turn signal
Thanks for the guide, but I thought I’d add here that the 2001 Maxima GLE
is a bit different. I wasn’t able to access the fog lights from above, so I
had to go from underneath.
same procedure to change peugeot 207 year2006?
hey 1aauto the next time u do a video can u do a video on how to flush
transmission fluid in a nissan maxima 2000 i never change my fluid in my
nissan i have about 200,000 miles on it now need help on that !!!!
You may want to check with the manufacturer of the HID kit.
Unfortunately we are working on videos for other vehicles but we can keep
this in mind for a future video
I’m not sure on how the factory wiring is, but you might need them to be on
a seperate switch.
How can i set the fog lights to come on without headlights being turned on
first
@MrNumby1 I hate rust. Do those bolts go in to clips or to the body of the
car itself? I can’t remember. If they went in to little clips you can
remove the clips pick up new ones at the hardware store and re-install. If
they go in to the body see if you can get pliers or vise grips on the other
end of the bolt and turn them the opposite way to remove.
Man I swear this guy is God of the automobile world. lol
very good instructions.. although there is a bit diff but it works.. thanks
Grreat vidoes
Knowledgeable people like you + 21st century benefits like youtube make
life so much easier
Fog light had to be hit with wrench pretty hard to get out, rather than my
palm. very helpful video
Thank you for the help, changed the light , problem is that those 10mm
screws were so rusted on the main head light and fog light that they
snapped. Any advise?
Thank you for making this so easy…much appreciated