2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Nissan Armada Titan, 5.6L V8
2004 2005 2006 2007 2008 2009 2010 Infiniti QX56
Brake Booster https://amzn.to/2TGNDxD
https://goo.gl/MM67vM
3/8 dr. Cordless Impact Wrench https://goo.gl/kAKkDS
https://goo.gl/YA63nk
3/8 Drive FlexHead Ratchet https://goo.gl/QVMstw
https://goo.gl/jjDK9r
3/8″ Drive Extension Set https://goo.gl/HrOvhn
https://goo.gl/hpyyHw
Replacing the brake booster on a 2007 Nissan Armada.
Friend concern: All the lights on the dash comes on and brake pedal will be very hard to push and car would be hard to stop. He would have to pull over to the side and turn off the car and wait a couple of minutes and then start the car. Then the lights would turn off and the brake pedal would work.
This is an intermittent problem so it is very hard for me to diagnose.
So I did not diagnose this, a friend of his that is a auto technician says the brake booster is bad. He told me just to replace it and so I did.
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done. Samsung W200 pocket camcorder was used to do this video.
Please subscribe and thank you for watching. Follow me on TWITTER: @88bmyvegas and http://lasvegasautoinsider.blogspot.com
){kind=link}
Get a head mounted camera please
You are Doktor
Thanks for the awesome tutorial!!
No wonder it's a good vid, he's gotta Toyota service shirt on. I miss those work shirts. Only have one left.
Best one handed mechanic ever , not even a curse word ! Thank you for your time !
Don't know where you live, but it looks like somewhere it doesn't snow, I wish I lived next to you because I would take my Armada to you, awesome videos without the audio narration THOMBS UP!
This video was great. I had the job done in 1.5hrs.
Only thing i would add is make sure to check if the brake lights are on at the end of the job. I had to go back and adjust where the booster mounted to the pedal(which took 2 mins)
Great Video BUT HOVEHICLE IN FRONT OF YOU
0:35 Shit
Wow..nice video. My buddy has a 2012 Altima. When he brakes it work as it should but if he slightly releases some pressure off the pedal to slowly stop the pedal feels weird and it goes down further and the car kinda brakes hard then usual. Like if im coming to a stop sign and step on Brake but i want to readjust the pressure and let off the brake just a tad, the brake will make a click noise and go down further and stop the car harder then normal. But if i keep steady ressure on the brake it wont happen. Brake booster? Or is it master cylinder? Please help!
very good!!
Did you need to adjust the push rod on the brake booster? Was it already set at correct length? If so, please explain how it is performed. Thank you. Great video.
I did this on my 2006 Armada. Installed an aftermarket one and a month later I had the same issue again. Took it to the dealer to get my ECU reset and they did. I thought for sure this was gonna be it. For 600 miles it ran great, no issues. the last two times I drove it in the past three days it has happened to me twice. Brake light turns on and loud grinding noise. Anyone know why this still happens?
I just did mine an hour ago. Took me about 4 hours to do it. One thing I would advise though is to take the hood out. It has 4 bolts and an easy one man job, reason being is it’s a pain when finally replacing the the new booster back in and you DEFINITELY need the space to wiggle around!!!… also , have a piece of wood or something to push the part into place where the 4 bolts need to get inserted into the brake assembly….this took the most time to figure out, between taking the hood and replacing the new booster….could have been easily a 2 hour job…tops. Thank you though for posting….couldn’t have done it without it…I’ll keep you all posted if this in fact fixes the damn brake issue!!!
Is the Delta Stroke Sensor on the Booster brake? I have an error code of E114 Delta Stroke Sensor. Wondering if the sensor can be cleaned or repaired? Or do I need to replace the whole booster assembly?
Did you have to bleed the brakes first
This is the best video ever!
No BS, no personality just pure monkey wrenching!! Love it.
Please don't do the Hang loose thing looks gay just a thumbs up is good!
hi idol im dax frm Phillipines…, ang ganda ng mga gamit sa shop…. go bless you. mabuhay mga pinoy
fak repairs like this…a lot of marks and damages…
You are the man bro! awesome!
Whats up brotha? I notice your oil gauge was high when driving. I have a similar issue with my 04 Armada but its only when Im at a stop and the gauge go low. I remember it used to be in the middle now its always on the low side when im at a stop. Is that normal. I like watching your videos on your page. Keep it up brotha!
I don't know other manufacturers, but Nissan seems to intentionally place parts which are difficult to access by layperson, so whenever any parts need replacement, owners have to take it to authorized mechanic.
On my Nissan Sunny, it's even difficult to remove one of the two screws on instrument lower panel.
Until now I cannot remove the nuts that connect the booster to the master cylinder. The nuts are stuck, but the layout of brake lines make it more difficult to remove them using socket wrench.
The procedure is simple, but not the execution, which is really frustrating.
Great video.. even though I hated taking everything apart to get that booster out of there.
01 nissan xterra has a bad brakebooster…. brake pedal goes to the floor… so dangerous scraped the side of cars
cool vid dud very helpful love the palm trees
This is a very good video i used this to change the brake booster on 2006 armada it was to the letter it took me 2.5 HRS to change Thanks for video it was a great help
Awesome video Angel, thanks and keep 'em coming!