2007 – 2013 Nissan Altima Radio Install

2007 – 2013 Nissan Altima Radio Install

Parts linked in the description below!

Watch a full tutorial as a 2007 Nissan Altima will have a brand new Boss Apple Carplay Double Din Touch Screen Radio installed. We will also be retaining the steering wheel volume controls with the new radio.

Note: This Altima was not equipped with BOSE audio. If you have Bose, we will link those variations in parts in the description below to retain it with you new radio!

This video applies to Nissan Versa models for years 2007, 2008, 2009, 2010, 2011, 2012, and 2013. This video also includes dash trim and stereo removal, wiring, installation, and testing.

To see the backup camera install, click here:
https://youtu.be/wN14hGvDYHA

To see the amp and sub install video, click here:
https://youtu.be/0qAXGb5xDvA

For the Crux SWRNS-63U Adapter unboxing, click here:
https://youtu.be/RBVos3mtDIA

If you have any questions, leave a comment below! Be sure to like and subscribe!

Install Parts Used (Amazon Associate Paid Links):
*Boss Double Din Radio BVCP9690A: https://amzn.to/3sHUTbG
*Crux SWRNS-63U Wiring Harness Adapter: https://amzn.to/3Km4IUy
*Metra 99-7423 Dash Kit: https://amzn.to/3Wequiz
*Metra 40-NI12 Antenna Adapter: https://amzn.to/3x7q5RW
–If you purchase the Crux harness kit, the Metra 40-NI12 is not needed.
*iSimple HDMI to AV Harness: https://amzn.to/2TCOH6k
*USB/HDMI Flush Mount Adapter: https://amzn.to/2WAX5oJ
***Alternative flush Mounts–
–USB Single: https://amzn.to/3gGHkms
–USB/USB: https://amzn.to/2URnTA0
–USB/AUX: https://amzn.to/2SYXEGS

NOTE: If you have factory BOSE audio, you will need these parts as there is not a Crux harness available to support this Gen Altima with Bose:
*Metra 70-7553 Amplified Wiring Harness: https://amzn.to/35WXsv4
*Metra 99-7423 Dash Kit: https://amzn.to/3Wequiz
*Metra 40-NI12 Antenna Adapter: https://amzn.to/3x7q5RW
*Axxess AX-NIS32BT Bluetooth bypass harness: https://ebay.us/Y7FJ7X
*Pac C4RAD Steering Wheel Control Harness: https://amzn.to/3AStI12

*Disclosure: As an Amazon Associate I earn from qualifying purchases*

166,118
Like
Save


Comments

@ProvoBeastAudio says:

Parts used linked in the description of the video!

@zaemargarrett4142 says:

I’m getting the same model radio except I’m getting the one without the cd port will the set up b the same

@BenNeely-z2r says:

Great video helped me a lot. 1 question the newer units require you to tap the Emergency brake wire. Any advice on accessing this on an 08 Altima with a foot pedal e-brake? I know one of the points is the plug behind the instrument cluster. Very hard to access.

@axoero says:

wtf… I can not do this
I'm not an engineer

@ceceorozco6806 says:

Hello can I use this on my Nissan maxima 2013?

@ozz1_e says:

I have a 2011 altima coupe, where exactly is the bluetooth by bass location in the trunk??

@rhurtadorh32 says:

Swi-cp2 pac also works with bose system

@chickenfoundation9323 says:

So with the Bluetooth bypass will that let you still use the Bluetooth button on the steering wheel to accept and hang up calls with Apple CarPlay?

@Peri-M says:

is it really true I can't just ground my parking brake wire and I really need the bypass relay on a pioneer radio?

My radio owner's manual is aggressively telling me to not bypass any parking brake stuff as it could be dangerous and I don't want to be in trouble if I ever resell my car.

@jsarambo says:

Thank you for the excellent video. I am replacing a factory Bose system, and this video states that the Crux wiring harness adapter will not work but your video of the Crux Harness unboxing says that the harness should work with the Bose system if you use the RCA pre outs. What is the latest and which parts should I buy because the PAC C4RAD is no longer available anywhere? Thank you for your assistance and the awesome video.

@64jamian says:

My screen works sometimes and sometimes it doesn’t. Recently it’s been not working more than it does. Also the volume fluctuates and the sound quality drops after playing music for a bit. Trying to figure out what to do from here

@luismancilla650 says:

i see the ring terminal you have of the ground but it looks like you soldered the ground together when soldering the harnesses. where is that pigtail/ring terminal coming from? the unit-side plug or the car-side (white) plug

@babiboib7 says:

Is there a video link for the hdmi/rca usb flush mount at 11:21?

@VINCENTCOELHO-h5m says:

Too complicated for for dumb people like me. I´m looking for a plug and play aftermarket radio for my altima 2012 and it seems to be mission impossible finding one. Are the manufacturers retarded or am I?

@SalvatorePlano says:

Thanks so much! I just have a quick question regarding the blue wire that's attached to the antenna housing.. what does that get attached to? Thanks for a great video!

@isaiahramcharitar3722 says:

Can a 7 inch radio work?

@arieldietz-fu1ty says:

i’m confused if i need a bluetooth harness? i have a 2012 nissan altima

@harv9328 says:

Is it necessary to replace the speakers when installing a new head unit in this vehicle?

@newageoutlaw82 says:

I don’t see the flush mount adapter installation link?

@FractumSeraph says:

Is it possible to save $60 by not buying the crux thing if I don't care about radio? I don't have volume controls on my model so that also doesn't matter.
I'd just be using Bluetooth to the radio, and need the speakers.

Long shot, but I figured it's worth asking.

@JoseTorres-yj3zt says:

I have a Nissan altima S sedan 2011 and I'm interested on replace the stock CD radio, but no audio controls included on the steering wheel, could be a problem please advise. I saw the video great tutorial.

@Anonymous_McNugget says:

How is this with directions? I’m getting one installed in my 2012 Nissan Altima and I’m worried because the screen is somewhat low so I would almost have to look down to see the directions

@MrSpencer222 says:

Ive always installed my own head units but my altima i just got has a bose system in it so it has a factory amp. So any head unit i tried to install amplifies the output to send it to the stock amp and its just not working for me. I might try to have someone install it for me

@ejack9205 says:

I have a 2010 Altima S sedan. It's an old car but I'm still in it all the time. Various parts of the system are starting to go out so I want to replace it. Im going with a 'mech-less ' stereo. Don't need navigation or all the extras. Just a factory compatible system with Bluetooth so I can play from my phone. Crutchfield recommended a JVC KD-X280BT. Can you tell me the additional parts I need for installation? My car does not have navigation & there are steering wheel controls.

@samuelroque2089 says:

Does anyone know if this head unit is WIRELESS CarPlay and AndroidAuto?

@xCARPx2014 says:

1:55 what are all the other plugs in the radio for?
Mine only uses 2, the main one & the antenna one.

@Herson503 says:

Do you know if 2012 radio fit in 2008 ?

Comments are disabled for this post.