2015 Mitsubishi Lancer Ralliart with a touchscreen radio. How to help wire a rear view camera on a lancer. The grey 8 pin connector taped to the wire harness is for the back up camera. Plug it into the deck and then on the left pillar of the trunk is the wire for the camera. Red or pink is the pos. For the camera and the light blue is the neg. and also the camera detect. Then power for the camera and you are done that’s it. Hope this helps.
When I got my camera, it came with the rca already cut ends. A black wire and a red. I put the black to the light blue and the red with the pink. Just 4 wire. 2 for power. 2 for camera
https://images.app.goo.gl/WopNMvMUZRJBzHUeA.
Here is the back
http://gearheadcentral.com/index.php?threads/how-to-wire-a-rear-view-camera-on-a-2015-mitsubishi-lancer.17043/#.Vt4s_9CYF1g
https://images.app.goo.gl/WopNMvMUZRJBzHUeA.
Here is the back
Which camera did you use?
Are you able to provide what camara you bought, and where is the wire that goes into the deck, do I need to purchase it?
For anyone wondering, I have the same head unit but no sub, and don't have this wiring on a GSR… so it's not on all of them stock I ended up taping into the reverse light wire directly.and it worked fine running the RCA/Signal wires from trunk to front of car isn't horrible didn't take long at all.
https://images.app.goo.gl/WopNMvMUZRJBzHUeA.
Here is the back
Please can you help me
I want a photo of wiring harness of this cd player specially aux harness it have more wires between it and Bluetooth device .
Can yoye take a phone of harness
Could this work for a 2009 GTS Model with the MCSS Navigation and Rockford Fosgate System?
Hey! Thanks for the video. I'm having issues with getting power to my camera… The picture will flicker on and then off. I was able to get a clean picture when I stuck the wires into the reverse light bulb contacts as a test though. I suspect I just got the wrong kind of wire taps. There's no reason it wouldn't be able to power both the bulb and camera at the same time?
I recently installed a Sygav head unit in my 2010 Evo GSR, replacing a Kenwood that a previous owner installed. I was under impression that I would need to run a RCA cable to the camera from the dash. My question is: can I expect that my car has the blue and red/pink RCA wires in the trunk, as well? All Evo X came equipped with these wires in the harness? What can I expect to see in the dash?
Hi Robert , great video. My question I know white and black cable reverse light also power for the camera. For the pink and light blue cables did you use splitter at the and of the yellow video cable to join them together? Where did you join the pink and blue wires, I saw on your video at the and it was yellow rca plug and than where it goes? Thanks
do you have the video of the back of the radio to se how you installed and thanks
Hey Robert,
I have a question. I bought a Cam that has light around it, and I had to cut the one end of the video cord off, in able to hook up the wires. The video cord also had a red 12 volt off each end, about foot long. I hooked up everything like you said, and nothing? I made sure all wires had a good connection. Do you think I need to hook up that 12 power, in order for it to work? or should I get another can and try it again. Did you have cut off the one side of a video wire, to hook up your.
Any help would be great. 🙂 . DAve
Hi Robert, great vid! Would you happen to know if the wires are also available for the Non-Navi lancers?
Which posi connector u used it for wire?
hello my friend i need your help
could you explain more?
which wire for what?