Antec Mercury AIO CPU Watercooler Install Guide

Antec Mercury AIO CPU Watercooler Install Guide
10,390
Like
Save


Comments

ayat ullah says:

can Antec Mercury 120 AIO Liquid CPU Cooler handle intel core i7 8700k smoothly ?

Elad Cohen says:

hey Antec, i just got my new Mercury 240 cooler, i plugged the power connector to the pump and the led controler to the motherboard, CPU temps are over 90… whats going on? i plugged the power to a sata power connector, the LED to a LED controler, whats up with the temps?

Varinder Bains says:

Hi Antec, I have been using you Mercury 360 since launch and it is good more than good. When is the RGB version going to be launched!!! I want one.

BUDGET GAMER says:

Hi Antec, I have ordered Mercury 360. I was just curious to know the name of the fans supplied with this unit and if they are available to be bought separately if needed because I want to go for push/pull setup for my Ryzen 7 1800x.

Jason Borejszo says:

What would be nice is a install guide for the Antec Mercury 240 on the LGA2066 setup. The booklet is very confusing and its difficult to get torqued nicely. Have a new install and my CPU is over heating on boot up. Bios defaults with no over clocking at all.

Mitchell Lukic says:

It is possible to have the LEDs stay one colour no matter what the temperature? Or can I turn them off completely? Cheers

Varinder Bains says:

Okay,I have now had the Antec running for just over a month. The AIO is performing way better than expected. After overclocking and playing around with vcore to get a stable overclock at 4.5GHz on the core i7-6700k the temps are – Prime95 test 67 degrees C max. I did replace the fans to Corsair HD RGB's and the sound is minimal. Very pleased and it looks great as well!!

Marloes Veenstra says:

Thanks mate! Mine is also working fine! I didn't know about the changing colour when the cpu is getting hot.. just running it for the first time now!

Varinder Bains says:

Hi Antec, just received the Mercury 360 from Scan and it was simple and straightforward to instal. My i7-6700k is now idling at 21 to 24 degrees and at load on Prime95 the highest core temp is 65 degrees which is better than my outgoing Corsair H110i GTX…Only one thing, the Pump LED always stays a breathing blue…no matter what the temp. Do let me know if I am doing anything wrong..Have installed exactly per this video though I have installed both the mini USB to a SATA power connector and the small connector to the CPU opt on the motherboard…All in all in terms of performance, this is an excellent CPU AIO, looks great and performs great..

mcrich1978 says:

Can't find this AIO anywhere in the States. Contacted support multiple times on it and not 1 response.

Write a comment