Repair the Mercedes Fuel Distributor — how to properly separate two halves of distributor. Part 2

Repair the Mercedes Fuel Distributor — how to properly separate two halves of distributor. Part 2

Little movement in all directions with a constant craving for separation of the two parts. The maximum displacement along the central axes of the two parts i…

6
Like
Save


Comments

Billy Mehaffey says:

A play list of the whole rebuild job or just one solid video would be
really helpful. And you’d get more views and likes.

CIS-Jetronic says:

Try to create tension in opposite directions (by hand) before heating and
during cooling down. In very serious cases, you can use the method
described above: But do not use steel screws, aluminum, or any soft metal

Mega RussianCarCrashes says:

Many thanks, job done 🙂

Mega RussianCarCrashes says:

have heated that unit and let it cool down and nothing happen, I did it
twice and still nothing 🙁 how do I open that ? Many thanks

CIS-Jetronic says:

I mean use only aluminum or any soft screws

Write a comment