How to replace rear wheel bearing MERCEDES-BENZ C W204 TUTORIAL | AUTODOC

How to replace rear wheel bearing MERCEDES-BENZ C W204 TUTORIAL | AUTODOC

How to replace / change / install / replacement rear wheel bearing / wheel bearing kit / hub bearing / wheel hub bearing on MERCEDES-BENZ C W204 TUTORIAL | AUTODOC
Top brands that produce wheel bearing: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.

On our website you will find a wide range of auto parts you are interested in:
Wheel bearing:
Wheel bearing for MERCEDES-BENZ:
Wheel bearing for MERCEDES-BENZ C W204:

00:55 — Use a socket №32
01:29 — Use a combination spanner №18
02:34 — Use a torx №T30
03:27 — Use round-nose pliers
06:31 — Use a socket №E10
07:17 — Use a socket №8
08:21 — Use a torx №M12 and a open-end wrench №18
12:36 — Use a socket №E18 and an open-end wrench №21
13:14 — Use a torx №M12 and a open-end wrench №18
14:32 — Use a socket №E12
17:34 — Press in the hub using a hydraulic press

If you’d like to view the replacement tutorial in text form, please turn on subtitles.

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► Mercedes-Benz C W204 car repair tutorial —
► How to replace rear brake discs and brake pads MERCEDES-BENZ C W204 —
► How to replace rear upper arm MERCEDES-BENZ C W204 —

AutoDoc App — install the app and be among the first to learn about all special offers and discounts!
❱❱ iTunes:
❱❱ Google Play:

#autodoc #autodoctutorial

AutoDoc in social media:

This video contains only tips and recommendations that can be useful to you in the course of car repair or replacement. AutoDoc shall not be liable for any harm, injury or property damage got in the process of repair and replacement due to incorrect use or misinterpretation of the given information. This video is for guidance only and does not guarantee a specific outcome. The user is personally liable for .incorrect or hazardous use of repair equipment, instruments or car parts. AutoDoc highly recommends to be careful and follow the safety rules during repair and replacement works. Keep in mind that exploitation of low quality auto parts does not guarantee the adequate level of road safety.



87handmedown says:

I just replaced both wheel bearings on my wife's car this weekend following this tutorial. Showing the torque values as things were being reassembled would have been nice, but if you follow the method shown in this video, you will not have any issues. Thanks autodoc!

Home O'DFree says:

Thank you one can figure out all that needs to be done with your video, thanks for sharing. I suspect I may have to do this on my 08 W204, however would like to confirm with anyone that had to have this job done to their cars, what are the suggested symptoms usually to narrow that the issue is the bearing and not other part? As for me I hear a loud hum. buzz inside the car coming from the rear and an occasional rattle coming from the truck area when I'm driving, I know Mercedes don't sound like that, but unsure which part is at fault. Would appreciate some tips to diagnose and narrow down which side.

MJR says:

Wow… thanks!!! Gonna have to pass on doing this one myself

Michael Kauzlarich says:

Would have been more helpful to say what he was doing instead of the repetitive music.

A B says:

This video is not accurate. I changed mine today without removing any of the brake shoes or emergency brake components (except for the emergency brake adjuster) nor any of the suspension linkages. Steps: remove axle nut, remove tire, remove caliper and rotor, tap the axle shaft inward. There is enough clearance to remove the 4 bolts holding the bearing in place. The bearing will come out with a bit of wiggling of the brake shoes. Buy a new spindle for $20 from Rock Auto rather than trying to get the old bearing race off the old spindle.

erink scotenn says:

dam well lets see i might be able to get this done for about 300bucks dam thought it would be easier than this

nicko500s says:

wow, im glad i watched this, the garage can do this, those parking brake shoes look too frustrating for me.

Ryan Dunbar says:

Looks like a pain in The ass. Any video for rear hub for 2000 ml320?

iMiaw Biskuit says:

auto doc please help me with a information y have a MB A140 W168 Classic 97-01,where my mechanic change the rear left wheel bearing (new) , and now its making a sound like a plastic tic tic tic tic ,more speed more tic sound its making .how can be fixed ? .thanks .

Alastair Munro says:

Hate German cars. Always over complicated and need special tools to fix them.

drowization says:

Great video but honestly Mercedes,,,, a bit over engineered isn't it. Why is it so sophisticated ????

gurpreet singh says:

I have 1.2 mpi engine 1198cc 2011 vw polo run 54000 km.i want to ask vw need to change fuel filter or not .if need to change pls tell me the righte time to change the fuel filter or after how many kms

geun ho kim says:


Write a comment