In this video, 1A Auto shows how to remove, install, or replace a leaking or malfunctioning thermostat. The video is applicable to the 02, 03, 04, 05, 06, 07 Mazda 6.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tazJ/1AXAA00013
• Pry Bar http://1aau.to/te4/1AXAA00020
• Complete Metric Socket Set http://1aau.to/tse/1AXAA00043
• Serpentine Belt Removal Tool http://1aau.to/td/1AXAA00019
• Needle nose pliers http://1aau.to/tkV/1AXAA00051
• Needle nose pliers http://1aau.to/tkV/1AXAA00052
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Drain Pan http://1aau.to/tfD/1AXAA00320
• Razor Blade / Gasket Scraper http://1aau.to/tbA/1AXAA00280
For More Info visit us at http://1aau.to/h/cQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Y de un Mazda cx 3?
Not only should year range and model be mentioned in title, but also the engine. This car shown in the video has the 2.3L inline-4 and this procedure is totally different for the 3.0L V6 for this same model in this same year range.
Does anyone know where the thermostat is on a v6?
Hey, nice job!
My mazda do not cool anymore im not sure if its the waterpump or the thermostat how can i know this? I fill coolant to max and go for a ride the car gets very fast to max temperature when i looked the coolant was even more then max and after the motor cooled down the cooler sucked all the coolant away? What can this be?
do you need to replace thermostat when replacing the water pump??
buen video.good
Well instructed! I have a Mazda Tribute with the location and design of the thermostat being very similar if not the same. I am prepared to tackle tomorrow! ha ha. Seriously though this video gives me the know how and confidence to handle as a do it your selfer. The torgue used is in question for the thermostat install and how many gallons of coolant to put back but may have to use best judgement on the torque and follow her instrutions when putting coolant back in. Thanks!
These videos are very well done. Thank you!
So less than half an hour to replace the thermostat. Dealers charge how much plus parts? Me thinks some are taking us for a fool! I think mine needs replacing as the temp drops on the motorway.
Give the videos coming. On 3 different cars I’ve owned these have been very helpful to know what I’m getting into.
Thanks very much
Hello, thank you for the video.
How much is the torque of the screws?
What’s the tool to loosen the tensioner up ?
The installation video is extremely helpful but.. Why is your website so hard to navigate. I have to scroll down through all the parts for my vehicle to find a thermostat. When I type “thermostat” into the keyword search, comes up with no results for my vehicle..
this is a really good video. she knows her stuff