Buy Now!
New Intake Manifold Gasket Set from 1AAuto.com http://1aau.to/ia/1AEGS00140
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tazJ/1AXAA00013
• 10mm Socket http://1aau.to/t4a/1AXAA00017
• 8mm Socket http://1aau.to/t4a/1AXAA00017
• Needle nose pliers http://1aau.to/tkV/1AXAA00051
• Needle nose pliers http://1aau.to/tkV/1AXAA00052
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Throttle Body Cleaner
• Drain Pan http://1aau.to/tfD/1AXAA00320
• Wire Brush http://1aau.to/tdA/1AXAA00079
For More Info visit us at http://1aau.to/h/rQ/
In the video, 1A Auto shows how to replace a torn, loose, or leaking intake manifold gasket. The video is applicable to the 02, 03, 04, 05, 06, 07 Mazda 6.
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
This is exactly what i needed to see to prepare the replace the intake manifold on my Mazda 5, which is leaking on the vacuum port. Unfortunately the insert is built into the manifold, which means the whole manifold needs to be replaced. The procedure looks to be about the same.
took my 2004 Mazda 1.8 Sakata to the dealership due to an airbag recall. The mechanic mentioned the engine light was on, and that the air intake/gasket did not sound right? the engine light has been intermittent recently, switching itself on and off. Is this a common Mazda 6 issue – annoyed as I had the car serviced in Feb.
Thanks for this video! This saved me so much time…along with a magnetic 10mm socket.
Great video thank you.
Hi is the same for 2008 model? ???
This a really good video. I was kinda annoyed to hear we need to change our gaskets on an 05 Mazda 6 but it doesn't look that bad i'm kinda looking forward to it now thanks!
how long did it take to get the center in the hole bolt lined up?
This is by far is the best Video showing in real time step by step details on how to take off intake and replace step by step. I have to remove intake on 2005 Focus ST with 2,3 engine just to replace the PCV valve as it the only way to change it which seems to be stuck open and i sucking oil from engine.
Great video,explained well from the start,thank you..
I need to change mine on the grand marquis.