Facebook: http://www.facebook.com/GoMishimoto Twitter: http://www.Twitter.com/Mishimoto Instagram: http://www.Instagram.com/Mishimoto Check out top drifter M…
Facebook: http://www.facebook.com/GoMishimoto Twitter: http://www.Twitter.com/Mishimoto Instagram: http://www.Instagram.com/Mishimoto Check out top drifter M…
You must be logged in to post a comment.
That is a possibility. In order to properly purge the system of air, you
need to turn your heater on, to cycle coolant through the heater core.
Otherwise you may have air bubbles trapped in your system, which could
cause overheating.
i think i need a new heater core my ac and heater didnt and still dont work
since i bought the car. but i have both
alright thank!!
No, your stock fans will work with our radiator! π
do the stock radiator fans have to be modified to fit this product?
As I stated, the install time also includes wiring up the fan shroud. It
also sounds like you have a lot of experience doing these, whereas someone
that has never done this install before might need a bit more time.
Did you remove the heating system, or is there an issue with it?
What if my heater doesn’t work to begin with
Hi Alex – The Fan Shroud Kit runs $265 on our website and you may be able
to find it at a lower cost through one of our vendors. I’ve included a link
to the product page in the description above. Thanks -Brian
Great info, thanks!
I did exactly as he said… I began draining my radiator and then was going
to get some coolant while it was draining, only problem I needed my car to
go get the coolant! Felt real smart after that…
Awesome to hear π -Julia
Matt Waldin is no ordinary man π
how much would the radiator and fans cost? thanks
A couple ratchets
Yum, I want this in my life.
Maybe cuz it’s for a Miata not an rx-8
Bad design for MAZDA RX-8 It doesn’t fit a lot of design mistakes. the
screw hols doesn’t match with OEM. the OEM brackets does not fit also if
you try to make them fit you will damage the radiator.
you said 1:30-2hrs work. but you did it less than 12mins.
Haha, it happens to the best of us!
I Have these fans on my MX-5 and they definitely keeps thing cool ; )
The estimated installation time says 1 1/2 – 2 hours because of the wiring
required to install the fan shroud. If you are just doing the radiator, and
you know what you’re doing, then the install will be much faster. π
Does replacing the radiator really take all that time?
You have got to be kidding? I install these all the time in about 25
minutes. Four bolts one screw.
excellent video. when i replaced the radiator on my 1990 miata, i found 2
ports on the bottom when i determined were for cooling transmission fluid.
this video must be for manual transmission, but still very helpful.
The original bushings can be sourced from a Mazda dealership if they are
missing. If you need bolts for the shroud these can be purchased at a
hardware store or dealership as well. Thanks -Brian
What if you don’t have the og parts do you offer that
You should link the radiator in the description. Excellent video.
No problem! glad this was helpful. -Brian
If they resprayed the whole car then why not the underside of the hood?
That is correct. Glad the video was helpful still!
SOLD!
Thank you. π
Your wish has been granted! -Brian
Excellent Tutorial!