2020 Mazda CX-5 NON-Bose install. The hardest thing about this install was finding the signal source. There was absolutely no information on the internet at this time as to where to tap into. I obviously used the tuner/amp wire harness but the signal source could be tapped into the center pillar on each side as well. wire colors are the same. you would have to run the wires to the back of the car and connect them to the Line out converter there. Hope this was helpful for some.
Link for LOC
SCOSCHE LOC80 Car Stereo Speaker 2-Channel Audio Adjustable Level Lineout Converter https://www.amazon.com/dp/B00009UHRE/ref=cm_sw_r_cp_api_glc_i_fA31Fb841VZXW
Nice! I am planning to just tap into the stock sub in the tire department!
Do I tap into both wires since there are tow colors of each or just use one?
I’m installing my amp today please answer my question can I use any loc or do I need this specific one I have the same car!
I can't drill that hole you made in a lease obviously right? Or is that something nobody notices
What size posi connectors did you use to do this?
Will the power mirrors still work
The remote cable?
I'd imagine this would work for a 22 cx5 as well
Picking up my 2022 Mazda Cx-5 on Monday. This vid will help with my sub install.
I've got a 2016 CX5 and installed a 4ch amp under the drivers seat and a mono sub amp under the passengers seat. I am getting ready to install an Audio Control DQDX. Any idea as to where I can place it? I don't want to remove the spare tire and use the well. Advice anyone? I'll post a video once everything is done.
MG thanks for sharing the install. Nice ride and nice job! Question for you if you recall..what gauge wire taps did you use? Waiting on delivery of a cx5 and trying to get my stuff prepped ahead of time. Thank you sir!
u did all that for that lil amp and sub lmao
Do you have any idea where to tap the wire in on the 2021 grand touring
I just did for mine , I tapped into the Bose sub . Notice it has tuning already. If I tap into the wire u show is it full range signal
Or has it been tuned already
My 2021 Mazda 3 apparently has constant power at every fuse. Any idea on how to run a remote wire?
Would this essentially be the same thing to do on a 2020 mazda 3?
Dude thanks for the video, I was struggling to find which wires belongs to the speakers. I needed to add tweeters, it helped leaps and bounds.
It needs an Lc2ii will sound wayyyy better
Why taping into all the wires? I'm confused. Also, what gauge are the wire taps?
I was wondering if you could connect the amp and speakers to the factory radio. Looks like that is a yes. Thank you!
What Size Are The Rear Door Speakers? Mazda's Website Says The BOSE System The Rear Doors Are "Only" 5.25" Yet Numerous Other Sources/Websites State 6.5" and 6 3/4" Will Fit The Rear Doors.