https://www.amazon.com/gp/product/B0074DFTKM/ref=as_li_tl?ie=UTF8&tag=fintechcomm0f-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B0074DFTKM&linkId=a3ed5856790c2a5ac2edc2e6169b5cc2
My AC was overheating but I engine was fine. I noticed the secondary fan was weak. This is how I fixed my issue. Took about 30 minutes.
The “cap cover” is a heat shield only on the condenser fan due to very close proximity to exhaust manifold. I found this video helpful but there was a hose bracket bolt to bottom of shroud and an additional plastic fastener on passenger side. Finally came out but not as fast.
Can you point to where is the radiator please?
I found fans on Amazon text 2 weeks till arrival Hundred dollars Or your local auto parts stores up to $200 up to $300
How much CFM?
Ill be changing my wife's tomorrow thank you for the information hell ya
Somebody change before only the motor fans .somebody know
Some motor fan number
Do both fans turn on at the same time? The fan on the left (standing in front of the car) does not start. Does this mean that it's the relay that has to be replaced?
Can you put a2008 Ford edge radiator fan in 2008 Lincoln mkx??
Thanks for video! Followed your directions for quick and easy replacement of my fan assembly.
Good job .There are all the same locations for Lincoln mkt,mks,Mkx,Ford edge,. Ford made all those cars good but with little complications how to do the service yourself. Specifically the transmission filter or transfer case fill bolt and drain plug.
Do you have the link to the fans you bought?, would appreciate it.
On my 08 Edge limited didn't have the cover either. But there was also a bolt holding a coolant line on the bottom drivers side so only 3 bolts on the fan assembly and the one on the air cleaner.
Great video, it's similar on the Ford Edge 2013, doing mines tomorrow..the secondary fan does not bring a cap cover so it did not come off. Great idea using the bungee cord, buying one at the dollar store tomorrow.. did you remove 2 nuts or 3 not sure if it has one at the bottom.. I'll find out tomorrow. Did u have a hard time removing the hoses? I found a tool that makes removing them a breeze..AutoCraft Clip Removal Pliers
Part No. AC505/W86556 19.99 at advance auto parts..
What year is that MKX you're working on?