How to Replace Rear Brakes 2010-2015 Lexus RX350

How to Replace Rear Brakes 2010-2015 Lexus RX350

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ia-1ABFS06005

This video shows you how to install new, quality TRQ brake pads and rotors on your 2010-2015 Lexus RX350. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2013 Lexus RX350 Base 3.5L Sport Utility 4-Door and the process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350

Tools you will need:
• Pocket Screwdriver
• 10mm Socket https://trq.video/oaQj-1AXAA00017
• 14mm Socket https://trq.video/oa7N-1AXAA00015
• 17mm Socket https://trq.video/oa7N-1AXAA00015
• 21mm Socket
• Brake Caliper Compressor Tool. Single Piston. Lever Style. https://www.1aauto.com/*/i/1axaa00288?utm_source=TRQYouTube&utm_medium=TRQdescription&utm_campaign=TRQvideodesc&utm_term=iXPfFdsySss&utm_content=installationandrepairs
• Brake Caliper Hanger https://trq.video/ogP-1AXAA00439
• Ratchet https://trq.video/obiC-1AXAA00016
• Torque Wrench https://trq.video/oao6-1AXAA00044
• Silicone Paste
• Bucket
• File
• Grinder
• Wire Brush https://trq.video/oqv-1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Lexus RX350 2nd Generation 2010-2015: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_aHKNYgurM5kLYnqdyoWte

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

25,813
Like
Save


Comments

@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

@jacklabloom635 says:

Thank you for this video. Awesome brake job. I am needing to do this repair.

@KevinSmith-jp3vn says:

This is the best rear brake video I’ve ever seen . Outstanding job covering all bases. Thank You !

@jeffreywilkinson606 says:

Great video

@thehatefull1761 says:

Why did you loosen the bleeder valve you can just take the reservoir cap off I've done it like that for over 25 years and never had a problem also you need to tell people to let the emergency brake down or they're going to have a hard time pulling the rotor off you also need to show people how to adjust the emergency brakes when you're done so that they don't ruin the emergency brake pads and they still have an emergency brake

@ngkatorski says:

You do the best Videos, really. As one post said, uncommonly good! Thank you!!

@ctuten7254 says:

I will never do a brake job but I really enjoyed the quality of your videos!

@JohnDoe-mp1zk says:

Rx 350 hydraulic
caliper broke

@billfisher0101 says:

Very helpful, thank you so much. Appreciate your style, nothing but searched information. Awsome video.

@bongo0042 says:

From about 10:13 to 11:16 you snapped on the rattle clip so fast then you didnt hold it to show a view of it from different angles so you could see how its should look. At 11:13 the angle you showed, you could see only one of the rattle clips making me have to rewind it over and over! Other than that and you saying how easy it was so many times this couldve been an almost perfect video.

@vincentrogers8586 says:

Great video! like uncommonly good! Gave spec'd ft-lbs torque on bolts, clear on the right way to do things and why to do them that way (which all just made me realize what a amatuer hack I am). Spot on camera work and edits. One of the best automotive tutorials I have seen. Kudos and much thanks!

@michaeldao1711 says:

excellent video ! we should have more woman mechanics .

@notsoeloquent says:

No description of loosening the parking brake to get the rotor off. Your access hole was also misaligned with the adjusting mechanism when you put the rotor back on.

@tomn5413 says:

Awesome video with details !

@MrBigstuff892 says:

Great video. I appreciate the details in getting the job done right. If you could please do a video on rear brakes for a 2009 Lexus GS 350, I would greatly appreciate it. Thanks for sharing the real way to do mechanic work.

@davidgiampetruzzi5145 says:

Excellent video. Showed Numerous small tips that make a big difference in doing the job right.

@jacklabloom635 says:

Helpful video.

@JohnJosephJSJ says:

Great video this helped me many thanks

Comments are disabled for this post.