Buy Now!
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/1ASHS00641
If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. This video shows you how to install a new TRQ wheel bearing on your 1998-2005 Lexus GS300.
• Check here for more videos on the 1997-2005 Lexus GS300: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-m7jhcoxMnJxXWEcncZDCp
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
great tutorial!
Is this the same process for an LS400?
So does the hub spin with that much resistance new? I feel like my bearings are bad but I'm not sure
I’m on my 4th 2GS. Don’t everrrrrrrrr do a wheel bearing on one without putting some kind of grease in there. Do not rely on the grease provided on the bearing. That is not sufficient enough.
From the factory abs ring comes with white lubricant on it. Shouldn't you put it too?
glad to see you close the gap with the brake pads at the end… most people don't do it… one thing tho.. I do it before lower the car cause sometimes when you lower the car down when the wheel makes contact with the floor it cocks it off center a bit and when you press the brake it isnt truly straight… great video… quick question… how many tons is your press ? thanks peace
I take it that this the same process as the lexus is300
Would a bearing press kit work?
Thanks for the detailed video! Very much appreciated! I´m about to do this , too.
After my lexus dealer gave me an estimate of 1200 bucks for both sides, i decided to give it a go doing it myself…