How to install android car stereo in your lexus gs300 gs400 gs430 DIY

How to install android car stereo in your lexus gs300 gs400 gs430 DIY

in this video I show you how I wired my after market android car stereo into my lexus gs300 but works with gs400 and gs430 years 98-05. There are a few websites with wiring diagrams but I found that a few of them are not accurate below is the wire colors i used on the vehicle as well as the location.

Constant 12V+ Blue/Yellow located on radio plug
Switched 12V+ Gray located on radio plug
Ground no wire available ground wire to chasis
Illumination Light Green located on radio plug
Left Front (+) Pink located on factory amp plug
Left Front (-) Purple located on factory amp plug
Right Front (+) Light Green located on factory amp plug
Right Front (-) Blue located on factory amp plug
Left Rear (+) Black located on factory amp plug
Left Rear (-) Yellow located on factory amp plug
Right Rear (+) Red located on factory amp plug
Right Rear (-) White located on factory amp plug

The factory amp is located behind the glove box. Remove the glove box via 3 philips screws inside along the top and 2 10mm under the glove box on the ouside of it.

link to where you can buy this android radio head unit with back up camera.
https://amzn.to/3ynfmDG

22,216
Like
Save


Comments

Anml Films says:

This is doing the most he didn’t even bypass that amp I could do this way cleaner and better they literally make adapters for the for these cars

Wesley Brake says:

whats the passcode to unlock bluetooth

Mo D says:

I see a few newer 9 inch models on Amazon since this video has been posted. Should those fit the same exact way? They look almost identical

Jonathan Berrien says:

You said there’s an apple version where can I get that?

flubyux2 says:

Just in case someone might not know: installers use a bundled cable called 9 wire. It has 4 channels worth of speaker wire plus an extra one for amp remote signal. Saves a lot more space than running 4 passes of bulky speaker wire over to the factory harness.

joel c says:

So I'm replacing my old double din player with this unit, surprisingly the old power harness plugs right in and powers the new hikity unit. My problem is figuring out the sound connection . The system has an aftermarket amp and sub which has RCA jacks connecting to the old unit. How can I connect it to the new hikity unit?

Adnel Peña says:

Hi Bud! Great video, can you please advise how you mounted the tablet to the console? Is it only snug in there or did you screw it in?

RJ says:

Very nice bro..question what size screen is that you have..also can you use a remote for the screen instead of happen to only control it through the screen only..

GoldBlooded559 says:

would this work on a 99 ls400?

Joe Cox says:

Also I think GS have subwoofer? does your wiring still support subwoofer? how to you wiring back camera from front to back trunk?

Joe Cox says:

Best thanks! But would you mind to tell us do we need extra dash kit, does it fit very well on 05 GS300? at the end you said need to shim? I get you just pull out two connectors on factory power amp and wiring the connectors to Android unit right?

Comments are disabled for this post.