Range Rover Sport 2016 L494, DIY Dash Cam Hard Wire Install.

Range Rover Sport 2016 L494, DIY Dash Cam Hard Wire Install.
1,706
Like
Save


Comments

petee1968 says:

Really useful, thanks so much for taking the time to post this. I'm looking to do exactly the same to mine and it'll save me a lot of trial and error πŸ˜‰
What rating fuse did you for the piggyback? Should it be the same as the one your piggybacking off (5A in this case?) or should it be lower?

mark average man. says:

Thanks for the video it's much appreciated, my question is that I have a parking monitoring and tampering sensor on my dash cam so can I use the live No49 so it's on standby when vehicle switched off. Thanks

Ed Ramsden says:

Just wanted to thank you for posting this video – it was extremely useful and allowed me to copy what you did to fit a dash cam to my wife's car. Only observation I've got is that I found that a T40 torx bit was the right size to undo the bolt that you used to get an earth. Thanks again for taking the time to make this video.

Comments are disabled for this post.