Land Rover Evoque turbo removal and replace

Land Rover Evoque turbo removal and replace

In this video, we will go into detail on how to remove and install a turbocharger on a 2012 Land Rover Evoque. This turbo manifold is damaged and not building any boost pressure at highway speeds. This turbo was supplied by Turbo Parts Canada.

9,233
Like
Save


Comments

Alan Trema says:

WHAT KIND OF CODE WERE YOU GETTING TO MAKE YOU REPLACE THE TURBO

Kevin Weaver says:

Thank you so much for the Video. I am a shop foreman at a local repair facility we sold our first turbo replacement on these ecoboosts. your edits and detail are excellent. Just a side note, the reason your suction pipe may not have lined up with the valve cover mount holes may be because of the cold impeller housing to hot impeller housing clocking. (i had to loosen the middle band clamp and move the cold side housing counterclockwise away from the engine and then retighten the band clamp in order for the plastic suction pipe to line up correctly)

Christian Vasquez says:

Buena opción si no tienes elevador, ya que por abajo del carro es más fácil y sólo se quita parte del exostor.

Lost_ Dragom says:

Hi Nick..Are you in Toronto? Where pls confirm I need to replce the turbo charger of 2014 Range Rover Evoque as well. So need your help.

tristan schoonhoven says:

Is this a diesel or a benzin? Or doesn't it matter ?

RossPerry Productions says:

Hi there Nick, I was wondering if you bought one of the cheap ebay turbos with the cast manifold? If so how did it go, and has it lasted?

Jorge Hernandez says:

There’s 2 metal coolant lines held together by this metal piece how do you separate that line from that holder I see on your video it’s out of the way. It’s a good video but there’s lots off small things you don’t show that I feel are critical for somebody that’s never done this and is attempting to do it. Day 3 here and I finally got the heat shield off. Now I need to get the lines off.

Jay #24 says:

How much is a turbo charger and I was going to try and do it myself vs the shop. How much do they usually charge for the shop and parts to do it? Hopefully you answer because I need some advice in that area a lot.

Sergio D says:

Hi i have q simmilar problem but i did not find the turbo for replacement. Do you know if it is a good idea weld the damage turbo manifold

Victor Montoya says:

Is this vehicle lifted in any way before removing the battery?

Kelvin De says:

This is an awesome video. Thx for the upload

Elliott Houser says:

What year rover, wondering which motor also, thx.

Comments are disabled for this post.