KIA Key – A Repair Film

KIA Key – A Repair Film

This KIA key just fell apart, the key blade divorced the remote head and they have since separated, with a little counselling from Dr Lock and an new roll pin the two have become one again

10,043
Like
Save


Comments

Kittens3435 says:

What kind tool is that?

Omar Bardhwan says:

استغرب لوجود عشره الف مشترك وانا منهم وانت اسلوبك عادي ولا يوجد شي جديد في عملك بل انه ممكن اي انسان مبتد ء يقوم بهذا العمل البسيط جدا

Michael O says:

Nathan in my experience the Pliers are much easier to use than those Vices, the pins from memory can be either 1.6 or 2mm. If the key head is flogged out its just easier to do a new blade & replace the holder(some of the Hyundai's are the same unit). I really should be putting more effort into doing videos to help people!

mossie says:

Great info.

Keyworx Auto Lock says:

I just got the same tool a couple of months ago. I think that the punch units should have a pin
like post that allows it to be inserted in the pin hole for easier servicing. you shouldn't have to
struggle with twezzers and that nice hammer you have. Magnet fits underneath and is for parts
retention (split pins). Should look at getting the Honda ign tool from Lock Tek , it works well but
you have to follow instructions exactly. You guessed it, since it has instructions it is from USA.

Comments are disabled for this post.