You do not have to take a bolt of under the fender as you show. You only have to take the two top bolts off that hold the headlight plastic brackets, then the headlight housing unit can be wiggled
Removing the headlight assembly was completely unnecessary. All I need was a crescent wrench adjusted to fit and the light popped off with very little pressure. When placing the new bulb, I guided myself but looking through the headlight.
You didn't have to take out the assembly. Just use a wrench . Box on one side use the crescent side to get in on either side of the tab. Use a little lever with a screwdriver and it'll pop right out.
I watched your video and was able to change the same difficult bulb you did on your video. Fortunately for me, I'm a girl with small hands and I was able to do this without taking out the entire lamp. If you are a man doing this, I highly recommend you get a girl with small hands involved. It will save you time. Five minute task.
Thank you! The passenger side bulb for me came out easily but the drivers side was so stiff I had to take the whole headlight like you did to get the bulb loose.
){kind=link}
You do not have to take a bolt of under the fender as you show. You only have to take the two top bolts off that hold the headlight plastic brackets, then the headlight housing unit can be wiggled
Good video…also if you want replace marker lights its easier to take out the assembly as you did here. Thanks for posting
Do you take the engine out to replace the spark plugs? ¯_(ツ)_/¯
Removing the headlight assembly was completely unnecessary. All I need was a crescent wrench adjusted to fit and the light popped off with very little pressure. When placing the new bulb, I guided myself but looking through the headlight.
Pretty useless. I already guessed the little they showed. Just wanted to see clear close up of bulb coming out and new going in.
Thank you. This just saved me prob 30 mins on a friends ds low beam bulb change
didn't have to remove all the stuff, changing was easy than the video
You didn't have to take out the assembly. Just use a wrench . Box on one side use the crescent side to get in on either side of the tab. Use a little lever with a screwdriver and it'll pop right out.
I have small hands and I couldn't get either side out without taking off the bolts.
I watched your video and was able to change the same difficult bulb you did on your video. Fortunately for me, I'm a girl with small hands and I was able to do this without taking out the entire lamp. If you are a man doing this, I highly recommend you get a girl with small hands involved. It will save you time. Five minute task.
Thank you so much for making this video it was so helpful
Thank you! The passenger side bulb for me came out easily but the drivers side was so stiff I had to take the whole headlight like you did to get the bulb loose.