How to Replace Rear Brakes 99-04 Jeep Grand Cherokee

How to Replace Rear Brakes 99-04 Jeep Grand Cherokee

Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off

Buy Now!
New Brake Kit from 1AAuto.com http://1aau.to/ia/1ABFS00863

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old rear brakes. This video is applicable to the 99, 00, 01, 02, 03, 04 Jeep Grand Cherokee.

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/taaA/1AXAA00013
• Pry Bar http://1aau.to/tb4/1AXAA00020
• 18mm Wrench
• Dead Blow Hammer http://1aau.to/tep/1AXAA00091
• T45 Torx Socket http://1aau.to/tkf/1AXAA00008
• 1/2 Inch Breaker Bar http://1aau.to/tdM/1AXAA00078
• Ratchet http://1aau.to/tJ5/1AXAA00016
• Torque Wrench http://1aau.to/tiE/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Paper Towels http://1aau.to/tf7/1AXSS00035
• Floor Jack http://1aau.to/tiG/1AXAA00068
• Jack Stands http://1aau.to/tiM/1AXAA00065
• Large C-Clamp
• Rubber Mallet http://1aau.to/tS/1AXAA00413
• Wire Brush http://1aau.to/tbo/1AXAA00079

For More Info visit us at http://1aau.to/h/ayR/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

48,905
Like
Save


Comments

Bob Kodadek says:

Would have been a good time to rebuild or replace the caliper. The piston in this type caliper can later stick in the caliper bore after simply pushing the dirty piston back into the bore. The piston will move out when applying the brake but not retract causing the job to be redone on a later date and possibly having to replace a warped rotor.

Daniel Mefford says:

Anyone know what size Allen socket to remove caliper?

Veneno says:

A nice and clean job!! Thank hoy.

Hedley Lint says:

What size torque wrench for the caliper screws?

Outmembered says:

Nice tutorial, guys. But you should NOT lube the caliper bolts inside the boots – read the manual. Rear bolts are non-lubricated.

Alan Sauer says:

I'm going to do the rear brakes today on a 03 cherokee. I yhink this video will be very helpful

angela warren says:

Someone. Please tell me what tool i need to. Get my brake pads change

angela warren says:

It this the same tool for a 2000

Phil Turpin says:

Im not sure which spring you had but it took 15 min to change pads and 1 1/2 hrs to get that @@!@#$%%$ spring back on!

Ashley Bellerose says:

My park break is broken lol

Ashley Bellerose says:

Is it necessary to use brake cleaner? I'm genuinely curious

Kevin Meier says:

Great video that gets to the point, step by step instruction that anyone can understand
Thank You !!

Alfa13 says:

EXCELLENT JOB and Video ! Thanks for my GC WJ 99 , Best Regards from Jeeper over the Seas 😉

pat mac says:

Anti seize on the studs?

Mike Coleman says:

Great video thanks!!

Scott Johnson says:

I appreciate that your cameraman will get underneath the car and down on the ground to get a good view of what you are showing us. VERY well done video, very informative.

Mike A says:

Excellent video! Will be buying parts from you soon

Steve Johnson says:

E Brake please.

dave z says:

What kind of grease do you use ?

salvador gonzalez says:

Thanks for that video I ask for doing that on 4 wheels and was 967dlls I will save about 500dlls

luis m jaramillo says:

just got yourself a new costumer thank you

Xplorer60 says:

Have new wire clips that were supplied. I live in rust country and the old wire clip was rusted fast. I had to cut it off. New wire clip refuses to be installed.

steelerdynasty2007 says:

exactly what i needed!

any ideas how to remove the crud from the center caps (12:53)? i have that issue and it's a bit worse.

Justin Laluga says:

Awesome thx

Lindsay Williams says:

Great Video!!! Great Lighting, very clear instructions! Can you do one for the E brake :))))))

Comments are disabled for this post.