Use some type of sealer paste and seal where the black AC duct collector goes out of the jeep and then get a 5/8″ ID plastic tube to go from that hole (originally doesn’t have anything on it), put it on the hole and route it somewhere. Use a zip tie to make sure it stays on. I ran my Jeep for 20mins with AC on and this is what I got. The water condensed from the AC unit leaked out of the tube onto the ground (as showed), and NOT ONTO THE PASSENGER SIDE FLOORBOARD, just as I wanted! Hopefully this helps someone. Just make sure to seal the black box that connects to the little tube that goes out of the firewall and connect a tube to let the runoff water go out.
Following tutorial:
http://www.stu-offroad.com/body/ac/acleak-1.htm
With some modding like the seal
){kind=link}
Comments