We will demonstrate how a Mesa garage door professional installer will prep, install a new garage door, and remove the old one in under 2 hrs.
We will demonstrate how a Mesa garage door professional installer will prep, install a new garage door, and remove the old one in under 2 hrs.
You must be logged in to post a comment.
I can’t believe u guys use genie wtf. That’s like the Toby of garage door
motors. For all if u that don’t know what toby is. its a brand with a name
like Sony. Same font just a shit brand. A regular fucking tail light
special at mesa. My god have mercy on ur soul.
First back your truck in don’t waste time walking around it all Damn day. I
won’t even go into how you didn’t take the door down in the right order.
Use fucking saw horses to hardware the hinges on to each section then stack
this saves a lot of time. Weather seal with a nail gun? No fucking way. The
nails will fall out over time. Plus in cold weather it will fuck the pvc
just man up with maze nails. Two people for a 16×7? What the fuck for? I do
16×12 doors by myself. Didn’t see you lube the spring or really do most of
the real work involved with installing a door so I’m sure you fucked up on
that as well. Better luck next time.
Not sure how 2 hours or less is possible. I have just recently started
working for my dad who has been doing this for over 30 years and it takes a
good 5 hours for a clean install without any problems. Not saying you can’t
get it done but that is fast. Most doors we fix are fast installs and
sloppy. We work two guys, one with 20+ years experience and no way 2 hours
is possible. We also use liftmaster and have been pleased. Do fix them but
some have 15-20 year life on them.
You guys suck balls mesa
Thank you for this video! Good info
Hi!! Nice video but can i ask you somthing
How much could i spend to put that on my garage? Tanks a lot
waste of time and useless video, idiots
can’t stand the music
why do you add music – horribly distracting…..
Everyone has their own way of installing/removing. On a standard non
insulated door, i take the top door screws out of all of the hinges, then i
take off the right side vertical track and take each section off one by
one. There are some risks involved, but with repetition, for me, it’s the
fastest and easiest way.
I agree, however in most cases you CAN mount the weather seals first if you
have adjustable track. I won’t work any other way anymore, it’s so much
easier and the door ALWAYS works right, even with dutch corners. These guys
do look pretty hackish though, kinda like the guy below me telling me how
he can install a 16′ with an opener in under an hour, pure butchery. Now, I
have a fully insulated door on my detached because I don’t wanna hear it.
Richards Wilcox r-16 with an 8500, pure silence.
Well done. We install garage doors in Columbia SC. Making a video like this
is a great idea. We have made some informative articles/posts but haven’t
branched out into videos like this. Way to go. You can see what we’ve done
on our site: biltritegaragedoors(dot)com
this video is part of the problem. This is exacly why Joe nobody thinks he
can safely work on springs and gets his fingers cut off.
nice music, whos that.
And you’re picture suggest you work for overhead door…not exactly
anywhere near the best doors I’ve ever ripped out….just like those
rebranded Genies you sold.
Hey! Their door was already fine!
There’s no way all of that was done in under 2 hours. I’ve been at this 10
years, no way even 2 guys could do all that in under 2 hours. Even skipping
important steps and installing that shit Genie opener should take up to 4
hours unless you’re just “Slapping it in.” It takes me 1 1/2 hrs to R&R an
opener and you’re doing both? I call shenanigans
it seems to me that you hiring ilegal aliens !! so you can save lots of
money, dude !!
Thanks, I’m across the country and will never buy a door from you but I
found the very helpful.
no safety gloves or glasses accident waiting to happen mesa BIG NO NO
REALY TW0 GUYS TO INSTALL A 16X7!!!! AND OFF THE FLOOR
garage door repairs 0114777387 0114773985
dude. 7 foot door. not home to a monster truck. I think you also forgot
about the tires.
Here’s another unsolicited critique. Crappy way to do your back hangs, if
customer hangs drywall you can never adjust them. To release your spring
tension, lift the door up, pop off the cables and set the door down. Stop
using the the Genie 1024, to many call back issues, the ProMax 500 is a
great unit.
Thank God for mute buttons!!!
close up orf work would be good cant see track install and alot else
mesa is a very bad company and the piece of crap commercial that gets aired
with that retard talking to the public like we are idiots is a complete
joke. All I hear from people who have used them is how bad this co is and
they rip you off.
step 2 can actually kill you and yet the camera guy didn’t give us a closeup
why did you put in a genie?????? LiftMaster is sooooooooo much better than
genie.
Wouldn’t have been able to do it without the porn music.
This isn’t a how to video. Its a sales pitch. sad.
Very good.
it takes a full day if you don’t know what you’re doing. that’s why you get
someone to do it for you.
shitty choice a garage door opener. Genie? pft. Liftmaster right hur.
Wtf this is the most retarded way i have ever seen a garage door installed
and there is no way this was installed under 2 hours in the way you did it
and what is the point of even making the video
Because like me they don’t wanna hear the door. I installed an R-16
Richards Wilcox door coupled with an 8500 and it’s pure silence. I would
never put a hollow door on my house.
As far as I know it’s the same as the 3800 just with the MyQ controls.
Doesn’t appear to be any different to me…same sensors, lock and cable
tension monitor but the updated wall control…which I like much better and
is more accurate at keeping time.
There’s no way this job can be done in less than 2 hrs. Hell, it takes us 2
hrs just to install a 2 car door. I also am not a fan of Clopay doors-they
come with cheap hardware, the galvanized springs lose tension after a while
and their sections start cracking after a few years. I prefer First United
Door Technologies (FUDT) or CHI.
Thanks for the Video. Great How to for us Do it yourselfers….
this 2 gays they are the best in LA CONGRATULATION MESA
Nice rave music.
Video should be called- how to REPLACE a garage door- wasted my time….
Excellent information. Thanks
Easier to set all the panels on sawhorses and arrange them so that you can
attach all the hardware/hinges/rollers to all the panels while they’re laid
out on the sawhorses. Once I have attached all my hardware, I like to place
the bottom panel in the opening and install the vertical tracks. Then I
install the intermediate panels, the horizontal track, the torsion springs,
wind the springs, and then I install the top panel. Then I can raise the
door halfway and install the back-hangs.
american doors and openers are no good. the palels are so thick. openers
are so noisy. the best doors are crawford from sweden and hormann from
germany. the best opener is marantek from germany. mario-greece
Neither do I. Idk if you’ve ever installed these but 16′ CHI doors with a
glass section are fucking awesome to do by yourself. Heaviest residential
steel doors I’ve ever done
@chicagolandhobby You are very right, Liftmaster motors are so much better
than Genie motors.