How to re-grease your front wheel bearings – Isuzu MU-X/D-MAX DIY Tutorial

How to re-grease your front wheel bearings – Isuzu MU-X/D-MAX DIY Tutorial

G’day Guys and Gals!

In this video i give you a thorough DIY tutorial on how to re-grease your front wheel bearings on your Isuzu Mu-x and D-max. This tutorial can also be used as a guide with other vehicles like the Holden Colorado and Colorado 7.

Firstly we start by chocking the rear wheels, raising the vehicle and placing a jack stand under the front of the vehicle. Then we remove the wheel and start disassembling the brakes and front hub. I show you in detail exactly how to do the job, the parts required and the type of grease to use.

Thanks a lot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )

LowRangeNick –

Instagram – https://www.instagram.com/Lowrangenick/
Facebook – https://www.facebook.com/Lowrangenick/

10,946
Like
Save


Comments

Shiggy Wiggy says:

Hello nick, do you need to torque these bolts to a certain spec?

kevin hay says:

Good video mate , have you done one with the rear bearings ? And is this the same as the holden colorado ? Thanks

MinJoe says:

Awesome video nick. Btw will it be the same for a Chevrolet Trailblazer?

DaveM says:

this is almost exactly what needs to be done on my holden colorado. cheers. and thanks for the advice to get a new oil/h ub seal before starting…. Although it worth mentioning that the bolts to re-attach the brake caliper have to be a whooping 150 foot pounds thats for the d-max as well.

garry g says:

Sir Nick may I know the oil seal no. And bearings specs.thnx

Kane Taylor says:

Hi Nick thanks for your video's as someone who knows nothing about cars but want's to learn your video's are great. Just a quick question regarding how often this should be done I have a 2019 D-max and just getting into the 4wd scene, already broken a steering rack end and got a nice love bite on the side ahaha, Thanks 🙂

jan 11 says:

nick what specific kilometers in the odometer before the MU-X need to be re-grease?

tony findlay says:

Thankyou very well done, It has been a while since I last did my Jan 12 Dmax wheel bearings, good to sit down and watch your clip, just clocking 190,000klm, Towing 2.5 tons of caravan, never had to walk home, best car I have ever owned

gabriel bach says:

how come you use the original recovery points and not original ones? doesn't it frighten you?

Troy Hunter says:

Good stuff Nick, Gonna have to give this a shot myself soon, my Dmax has started the Isuzu wheel bearing squeak. Its doing my head in!

P A says:

Thanks uncle Nick… Love it

robert saunders says:

Can we request a video on doing the valve clearances that's my next big task and the only thing I haven't done before

Mr. Entiat says:

Hi nick, does mu-x 4×4 in australia has a lsd or differential lock?

listenup pilgram says:

Why and when do you need to re grease bearings?

Craig Buchan says:

Great how to mate. Im on 37,000km atm. Just before I put it in for my 15,000 km service. I experienced some high pitched squealing from the front. Was told possible dry hub. Service was done and squeal gone. Now its back but intermittent. So its been hard to get it to happen when looked at. Do you think hub and bearings need re-grease? Or is it another issue? Have you come across this issue yourself?

ttubero tubero says:

is this a 4wd mux? thanks mate!

Off The Meyn Road says:

Great video mate. I wonder if the dealers can be bothered doing this every 30k as per service manual…

Jimmy Jaim says:

may I know the torque settings of the bolt when you put back the brake assembly mate? thank you.

nort sotho says:

Hey mate will this be the same for a 2015 model dmax

Gene Springer says:

Great video Nick. I love the whole series, very well done and very professional. I can't wait for you to break a CV and bend a tie rod 🙂

Jan Chaves says:

Great video mate, many thanks!

Comments are disabled for this post.