Car Fix DIY Videos

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-e3

This video shows you how to install a new front bumper cover from TRQ on your 2008-2013 INFINITI G37. TRQ bumper covers are exact replacements for your vehicle’s factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This repair was done on a 2010 INFINITI G37 X 3.7L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 INFINITI G37
2009 INFINITI G37
2010 INFINITI G37
2011 INFINITI G37
2012 INFINITI G37
2013 INFINITI G37

Tools you will need:
• 10mm Wrench https://trq.video/oatV-1AXAA00010
• 10mm Socket https://trq.video/ob8G-1AXAA00017
• 21mm Socket
• Trim Tool Set https://trq.video/oaN4-1AXXX00006
• Ratchet https://trq.video/ocDr-1AXAA00016
• Socket Extensions https://trq.video/ocDm-1AXAA00015
• Torque Wrench https://trq.video/obEx-1AXAA00044
• Gloves https://trq.video/obU5-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaWR-1AXAA00068
• Jack Stands https://trq.video/oaIs-1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.