How to remove Infiniti Q50 rear interior and install an aftermarket audio wiring kit

How to remove Infiniti Q50 rear interior and install an aftermarket audio wiring kit

In this video I am showing how to disassemble a good portion of the interior of an Infiniti Q50 starting at the front kick panels and moving back to the removal of the rear deck lid. While removing the interior parts, I will also be covering how to run the wiring for an after market subwoofer and amplifier setup.

Skar Audio SDR-10
https://www.amazon.com/dp/B078TNY8JT?psc=1&ref=ppx_pop_dt_b_product_details

Stinger Installation kit
https://www.amazon.com/Stinger-SK6241-Gauge-Amplifier-Installation/dp/B00L2SOQ5E/ref=sr_1_6?keywords=stinger+power+wire&qid=1578044644&sr=8-6

Kicker cx600.1
Sourced used from eBay

4,581
Like
Save


Comments

Mario Yepez says:

Where did you get your subwoofer case? & what was the price on it?

Douglas Groom says:

What yr is your q50

Kyrim says:

I had a question about the LOC, when hooking up the R +/- and the L+/- to the factory sub wiring did you hook up the R+/- to one wire off the factory sub and the L+/- to the other or are there 4 wires coming off the factory sub harness?

allstarEXT2815 says:

Did you just split the signal out of the factory woofer output harness, and jump to both the left and right inputs to your LC2I? I noticed you have all 4 wires in the LC2I harness, but only 2 coming from the factory woofer harness. Thanks for the info! Great detailed video!

C H says:

Do I need to remove the backseats in order to get access to the back deck under the carpet?

j js says:

very informative, thank you

boostx40 says:

AATW! I don't recognize the flash on your beret, what unit? Good job on the install btw 😉

Cars N' Boba says:

Very detailed video! Good job!

Crux Interfacing Solutions says:

Very informative and well done, if you want to add Apple Car Play to your factory radio please check out our page.

bksbullynyc2 says:

What speakers did you tap for the LC2I? I had a setup like this in my 2006 M 35 but just bought a 2011 M 37…. I'm sure the set up is the same for your Q but… I've heard some people tap the sub and some tap the rear speakers….

Clemente310x says:

What mounting plates are those ? What are they called ? Where can I find them ? Are they aluminum? Thanks

veeramootoo Lachna says:

What signal wire did u use?

Patrick S says:

That's some great detail! Thanks for making this for us looking to install an amp.

bmtkid00 says:

Awesome video thanks for the step by step instructions!!

Cesar Rodriguez says:

Where you get your stuff from ? Amazon ?

Comments are disabled for this post.