Car Fix DIY Videos

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ia-1ASHR00272
New Wheel Bearing & Hub Assembly Set from 1AAuto.com https://trq.video/ia-1ASHS00868

This video shows you how to install a new wheel hub and bearing on your 2006-2010 Hyundai Sonata. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2009 Hyundai Sonata SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2006 Hyundai Sonata
2007 Hyundai Sonata
2008 Hyundai Sonata
2009 Hyundai Sonata
2010 Hyundai Sonata

Tools you will need:
• Pry Bar https://trq.video/oaxQ-1AXAA00020
• 14mm Socket
• 21mm Socket
• Ratchet
• Torque Wrench https://trq.video/ob4U-1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags
• Gloves https://trq.video/ocFP-1AXSS00048
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Drain Pan
• Hammer
• Jack Stands
• Sanding Block
• Wheel Chocks
• Wire Brush https://trq.video/oHT-1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.