How to Replace Lower Ball Joint 10-14 Hyundai Sonata

How to Replace Lower Ball Joint 10-14 Hyundai Sonata

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/106/x/ball-joint

In the video, 1A Auto shows how to remove and replace a failed, loose, or rusty front lower ball joint. The video is applicable to the 10, 11, 12, 13, 14, Hyundai Sonata

🔧 List of tools used:
• Pry Bar http://1aau.to/te4/1AXAA00020
• 17mm Wrench http://1aau.to/tqy/1AXAA00010
• 17mm Socket http://1aau.to/takn/1AXAA00015
• 21mm Socket http://1aau.to/tse/1AXAA00043
• Pickle Fork
• Side Cutters
• 1/2 Inch Breaker Bar http://1aau.to/thP/1AXAA00078
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Rust Penetrant
• Hammer http://1aau.to/ti7/1AXAA00091

For More Info visit us at http://1aau.to/h/bwx/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

2,588
Like
Save


Comments

pinoyeh says:

Very informative. My 2012 Sonata GLS have a different shape control arm (sport suspension) , thus, it uses a different ball joint where the ball joint is mounted on top of the control arm. Nevertheless, the replacement and install is very similar.

Dan H says:

Is that bolt that connects the knuckle to the control arm available at 1A auto?

John Zeimet says:

Great video, but after watching it , there's no way that I would tackle that. Also I do not have those kind of tools air chisel, torch, unfortunately not.

Helal Sulieman says:

I wonder how it sounded after he shoved the backing plate onto the rotor lol

Comments are disabled for this post.