Car Fix DIY Videos

Buy Now!
New CV Axle Assembly from 1AAuto.com https://trq.video/ic-1AACV01192

This video shows you how to install new front CV axle assemblies from TRQ on your 2017-2020 Hyundai Elantra (2.0L L4). A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This repair was done on a 2017 Hyundai Elantra Value Edition 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2017 Hyundai Elantra
2018 Hyundai Elantra
2019 Hyundai Elantra
2020 Hyundai Elantra

Tools you will need:
• Pry Bar https://trq.video/oaA9-1AXAA00020
• 17mm Wrench
• 10mm Socket
• 12mm Socket
• 17mm Socket
• 19mm Socket
• 21mm Socket
• 34mm Socket https://trq.video/oay-1AAST00004
• Pliers
• Side Cutters
• Torque Wrench https://trq.video/ocao-1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Gloves https://trq.video/ocRu-1AXSS00048
• Safety Glasses
• Bucket
• Floor Jack
• Hammer
• Jack Stands
• Punch
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.