2011-2014 Hyundai Sonata Valve Cover Gasket Replacement DIY

2011-2014 Hyundai Sonata Valve Cover Gasket Replacement DIY

Here’s how to replace the valve cover gaskets on a Hyundai Sonata. This will apply to other cars such as the kia optima, santa fe, etc with the same 2.0L and 2.4L engines.
Valve cover gasket set: https://amzn.to/3gnrih0
Fuel pump seal: https://amzn.to/3vi7wcj
Sealant: https://amzn.to/2SsACs2
Wobble extension set: https://amzn.to/3wtKsbG
Socket/wrench set: https://amzn.to/3zjitgX
Electric ratchet: https://amzn.to/3gmzPAQ
Gloves: https://amzn.to/3vgXF6D
#ad

29,506
Like
Save


Comments

MrRangerZr1 says:

Valve cover gasket set: https://amzn.to/3gnrih0

Fuel pump seal: https://amzn.to/3vi7wcj

Sealant: https://amzn.to/2SsACs2

Wobble extension set: https://amzn.to/3wtKsbG

Socket/wrench set: https://amzn.to/3zjitgX

Electric ratchet: https://amzn.to/3gmzPAQ

Gloves: https://amzn.to/3vgXF6D

#ad

jim carson says:

Great video, thanks.

Hector Boyar says:

Make sure you let the car sit over night to avoid a hot engine bay incase that gas spews when disconnecting the fuel pump.

Hector Boyar says:

subscribed!!

byronz422 says:

What's the name of the smaller gasket?

Dave Giron says:

Thanks for the tutorial it helped me do the job, there was one screw that was hard to take off, and it was under the fuel line bit other than that it went smoothly.

Ray Ray says:

What's the avg price to get this done?

Ant says:

How long does it take for the seal to cure before driving it

Swagger says:

2011 Sonata 2.0 turbo leaking on to turbo heat shield. I followed this video and finished with no issues in about 2.5 hours. The bolt under the fuel line was a pain. Thanks!!

Collin J. Foster says:

I was told by Hyundai to replace the fuel line because it’s a single use product once uninstalled it’s unusable. That true?

YAHUAH SERVANT 7 says:

Thanks for video much appreciated,however i didn't see your strategy for removing the valve cover bolt located directly under the fuel line ?

Kreative Kontrol says:

Does it matter if the spark plugs are still on? I didnt see them removed in this video.

Alonzo goodman jr. says:

Absolutely Excellent video.

Nikita Annenkov says:

Is there a pattern to follow when tightening back the 10 valve cover bolts?

John B. Riley says:

Thank you for a thorough & clear video with all the info I needed.

Yoelia Vega says:

What if the fuel line shoots gas out? Does the vehicle need to be empty on gas?

Forever Tera says:

What were the symptoms the reasons you replaced it

Bigotón Brand says:

Is that fuel pump o ring expensive? I'm checking for my 16 sonata, oem, comes out to 40$+…does that sound correct pr can I use regular o rings from autozone? Ty

Z Mac says:

Excellent video! Nice clean format! Thanks for posting!

enchantedbananas says:

Thanks dude i've come to Youtube for other instructionals on this model car and honestly wish they were all like your format. Great job i thumbs it up.

SFL_PO says:

To what torque rating do we bolt down the valve cover bolts ?

Comments are disabled for this post.