H3 Hummer Steering Shaft Replacement

H3 Hummer Steering Shaft Replacement

Quick how to on the common issue with H3 hummer upper steering shafts. Couldnt find one that didnt over complicate things so I decided to make my own

5,818
Like
Save


Comments

Drr Walther says:

Thanks man good job
Helped me right out

T Eng says:

thanks for sharing

LU says:

AWESOME VIDEO!!!!!!!
THANK YOU SO MUCH!
I am replacing mine this weekend. Mine looks and shakes like the one you replaced

vic abramov says:

so if the part is bad what would the steering feel like? my H3 seems to have play in the steering wheel and my tires are cupping. is this what causing my issue ?

Dennis Kubiak says:

This video is helpful, and I used it to successfully install a new shaft on a 2007 H3. But a couple extra steps can make it much easier. The removal of the steering column bolts can be a knuckle-buster, and if you take 10-15 minutes to remove the panel under the steering column, which requires removing the hood release lever and disconnecting the parking brake release, and then the steel support behind i (six bolts, unsnapping the OBD II connector from the bracket), your access is much better, wide open. The time spent doing this probably offsets the struggle of removing and re-installing the steering column bolts in an awkward and cramped position. But as this video shows, this is a reasonable DIY job, one I did after two shops refused to even try it.

Bsounds says:

Where did u get parts?

Victor L .Ramos says:

Have a question, I bought a H3 today and have steering wheel play. That should be a bad steering column?

Howard Hobgood says:

good video , ive got h3 but havent had that problem , but always like to watch any repair on one ,you did a good job explaining what you did !

Robert Marsh says:

Thx for simplifying this job for me!

Antonio Reyes says:

Who else just went out to the garage popped their h3 hood and looked at that U joint??

Carlos Herrera says:

What’s is the part number for the shaft?

Wayne Dinkins says:

love you man!! you made it so ease mine is doing the same thing and i can tackle this my self!!

Brian N says:

Great vid gonna do this after new years

rfd883 says:

Going to replace the intermediate shaft on my '06 H3 this weekend. So far this is the most helpful video I've found on YouTube. Thanks!

Comments are disabled for this post.