Brian Eslick from How to Automotive http://www.howtoautomotive.com takes you step-by-step through the process of replacing the valve cover gasket on a 2002-2006 Honda CR-V with 2.4L engine.
Affiliate link mentioned in the video for Fel-Pro VS50614R Valve Cover Gasket Set http://amzn.to/2vjztSl
Affiliate link mentioned in the video for Cyclo C111C Brake & Parts Clean (Non-Chlorinated Formula) – 14 oz http://amzn.to/2tn0HWF
Affiliate link mentioned in the video for Permatex 85144 The Right Stuff Grey Gasket Maker, 7.5 oz. http://amzn.to/2vjuCQZ
Affiliate link mentioned in the video for Milwaukee 2754-22 M18 Fuel 3/8″ Impact Wr- Xc Kit http://amzn.to/2u1kZJE
Affiliate link mentioned in the video for Milwaukee 2456-21 M12 Cordless 1/4″ Lithium-Ion Ratchet Kit http://amzn.to/2ugbg2p
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: http://www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: https://www.facebook.com/How-to-Autom…
Google+: https://plus.google.com/+HowtoAutomot…
LinkedIn: https://www.linkedin.com/in/brian-esl…
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive #AutoRepair
){kind=link}
Oil is going thru intake hose (air filter area) i was told to replace the valve cover gasket
There is oil inside the little hose that links the valve cover and the air intake hose. Is that normal?. I was told to replace the valve cover gasket because there is oil inside the the air intake
Excellent video! Would you please do one teaching valve adjustment? I have 02 cr-v and is making some noise. I am preparing to do that as well. Thank you very much.
Thanks brother
Is there a torque spec on those bolts?
hello from 2021 you and ChrisFix are the most underrated youtube how to videos good job
Holy crap what impact are you using again?
Thanks for the video. I followed this to replace my 04 crv engine cover gasket. Some important information was not mentioned in the video. There is a fixture at the right side of the engine next to the air filter, you will need to unscrew the 10mm bolt under 2 lines to have better room to get the cover out. The 10mm bolt is really hard to access. Otherwise you will find the fixture at the right lower corner is perfectly in your way to lift the engine cover. I ended up broke one engine cover stud bolt by over tighten once I put the engine cover back. And distorted another engine cover bolt too. Then I realized Honda has specific torque on engine bolts. So the torque to tight the engine cover nuts is 7.2 ft lbs. In case someone broke the stud bolt in the engine like I do. The torque to tighten the engine cover stud bolt is 16 ft lb and you will need a 12mm deep socket to replace them. The torque for engine coil is 8.8 ft lb.
excellent vid brian,hats off yo uou bro….
Is there a torque spec for the valve cover bolts?
I broke 2 of the nuts and gave up.
A "dental mirror" lmao. Mirrors are sold on every tool truck and in every tool catalog.
What’s the torque spec on those bolts, is it 7.2 or 8.7 ft lbs?
Hi Brian, where is your shop?
Brian, I have 04 crv and need valve cover gasket replacement and valve adjustment, would you have a video for valve adjustment? Ty
Is the process the same for a 2009 Honda Cr-v?
The black gasket maker takes 24hrs to cure do you recomend waiting?