Is your Honda K series making a horrible screeching noise? It might be the serpentine belt tensioner. In this video I show you how to replace a bad serpentine belt tensioner on a Honda K series engine. I’m doing this job in a 2004 Honda Element, but this method should work for most Honda K series engines.
Unfortunately I couldn’t find the info on my former tensioner that went bad. This is the one I replaced it with.
Dayco Tensioner: https://www.amazon.com/Dayco-89321-Belt-Drive-Tensioner/dp/B000JZGMDU/ref=sr_1_11?ie=UTF8&qid=1523475258&sr=8-11&keywords=2004+element+belt+tensioner
Hopefully it lasts longer than its predecessor. For best results, I recommend the Honda part, but it does come at a price.
Honda Tensioner: https://www.hondapartsnow.com/genuine/honda~tensioner~assy~31170-raa-a02.html?Make=Honda&Model=Element&Year=2004&Submodel=&Filter=(bt=3%2c457;et=2%2c5)&Location=engine-mounting-bracket,3066271,4
The best place for answers to your automotive questions: http://www.ericthecarguy.com
Check out the ETCG Blog for the latest info: https://www.ericthecarguy.com/blog
Check out my ETCG1 channel: https://www.youtube.com/user/ETCG1
Thanks for watching!
Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/70148-how-to-replace-a-honda-k-series-serpentine-belt-tensioner
Tools
Long 12-14mm wrench: https://store.snapon.com/Standard-Handle-0-Offset-mm-12-Point-12-mm-14-mm-0-Offset-Metric-Box-Wrench-P633884.aspx
Related Videos
How To Replace a Honda K Series Starter the ‘Easy’ Way: https://youtu.be/dRZN4Tk9bNo
Honda Element & CRV Alternator Replacement With Diagnosis: https://youtu.be/Fb2ciFHkkeI
Honda Element/CRV 110K Service (Part 1): https://www.youtube.com/watch?v=fMplrMKIIoo&t=7s
Honda Element/CRV 110K Service (Part 2): https://www.youtube.com/watch?v=gciwVamERn0
How To Reset Honda Element Maintenance Light: https://www.youtube.com/watch?v=LRMax93CjzA
Honda K Series Valve Adjustment: https://www.youtube.com/watch?v=959I0wF5NH8
Honda Element/CRV Thermostat Replacement: https://www.youtube.com/watch?v=z0vWv2Jwn3A&t=342s
How To Change Power Steering Fluid Honda Element: https://www.youtube.com/watch?v=Iev1xIr345Y
Honda Element Front Stabilizer Link Replacement: https://www.youtube.com/watch?v=GYosZGby0-I
Honda Element Lower Control Arm Bushing Replacement: https://www.youtube.com/watch?v=fpaIvEN57Jg
Finding and Repairing Rear End Noise Honda Element: https://www.youtube.com/watch?v=SRYfxRym-Kw
Honda Element Hood Cable Replacement: https://www.youtube.com/watch?v=rDF9g9BKYCM
**Answers to your automotive questions found here: http://www.ericthecarguy.com/faq
Social Network Links
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Instagram: http://instagram.com/ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.
Can you post a video of how to replace a clutch if you get that opportunity. Thanks
I like the changes you made to how you edit with the bolt sizes and multiple camera angles.
https://youtu.be/YSayAkKSNVM i have a 92 c1500 4.3 v6 that randomly looses power i did a tune uo rebuilt the tbi with new injectors replaced fuel system i really need some help it also has new temp sensor,tps,map,egr valve, and no check engine light
I changed my 08 crv tensioner from underneath, did not have to take the mount off
This looks a lot easier than it used to be on my 2003 Acura TL.
Great video.
I'm glad he came back to make videos
I'm so cheap I'd take the old tensioner take off the bearing seals and re pack with quality grease. Won't work as long as a new part but cheaper fix of course.
I recently did one on a Toyota 2zz, what a nightmare. Similar in the fact you have to dismount the engine, but the tensioner is just a retarded design, rather than using a spring, it uses a hydraulic damper to hold tension. In addition to that, a nut is stamped on the aluminum assembly where you put a steel socket onto it to release an incredible amount of tension with almost no clearance. Well, with that type of force, aluminum gives first and the pos thin tensioner tool I was using broke and rounded the nut which is part of the tensioner assembly. So I had to order a new tensioner, get a long ass 19mm wrench, eat the cost of the first one, and do it all over again several days later. If you have a 2zz, man just take it to a shop and save yourself the stress.
Why haven't you got s show on discovery?
Be nice if you could just replace the pulley and bearing, without having to buy a tensioner assembly, but, it looks like you'd still have to remove the tensioner to change the bearing, and since it's off anyway, might as well do the whole unit…unless this was Honda's diabolical plan to sell tensioners…lol
Love your videos man
That Milwaukee tool on the hood, is that a light? Is it any good?
It's good to see that you're trying new things. The new thumbnails really pop. Good video Eric.
Will the 1 year oil change be in June?
Roughly how long does the light under the hood last on a single charge?
Eric you seem like a dude I’d have a beer with. Thanks for all the videos and great info. You have helped me get through Yamaha Marine University. I always use you and Scanner Danners videos for studying and reference material. I’m a avid subscriber and always like your vids. Thanks again for taking the time to do all this. You are a damn good tech and instructor.
Mike ,Stillwater Marine ATL Georgia.
Was a matter of time before Milwaukee constructed a new lightsaber.
what an old clunker!
QUESTION, I'm 17 and love working on cars, I don't no much and when my parents got a new car they gave me there old 1997 Kia sportage which was barely running. I did some work and replaced a bunch of stuff and it runs pretty good now, EXCEPT the throttle stays engaged after I let my foot of the gas, Any Tips Eric????
I'm wondering if the tensioner is bad on my Element. The whole block has slight vibration when the AC is switched on. Nobody seems to know why. Ideas?
I want the one year oil analysis using the mobile 1 oil
My belt and tensioner are still original on my Celica. And it's a 2002
Went through many Dayco-brand tensioners, They’ve gotten worse over the years and their bearings are absolute garbage. Even some of their tent your pulleys are plastic when they shouldn’t be. I have found myself not been able to find certain tensioners but been able to remove the bearings and find tensioner bearing’s from manufacturers like Koyo or Timken. I’ve also been fortunate with Continental tensioner, but if all else fails, go with OE.
great vid Eric keep them coming
"Bit of penetrating oil on this long stud"
Huehuehue
didn't know it was okay to lift the engine by the oil pan
Did I see the Fairmont with the original hubcaps and no cage? From the archives?