http://www.xenonsupply.com/honda-civic-hid-xenon-package.html How to Install HID: Do it Yourself Installation of HID Xenon Headlights on a 1992 Honda Civic H…
http://www.xenonsupply.com/honda-civic-hid-xenon-package.html How to Install HID: Do it Yourself Installation of HID Xenon Headlights on a 1992 Honda Civic H…
You must be logged in to post a comment.
){kind=link}
Pls show how to install hid to 2007 honda crv and 2007 honda civic. thanks
Would it work on a 02 civic if I was to use Bi-xenon?
with projector headlights, can you install HID’s on them too just the same? or are the different?
your supose to unhook the negative terminal first.
Great video. But I mean great 🙂
If you unloosened it wouldn’t you tighten it?
0:34
oh ok thanks
Theres plenty of space to work on the bulb without taking out the headlight. removing the headlight normally requires you to remove the bumper.
-XS Team
please answer but wouldnt it be easier to take out the headlight to put in the bulb
This Install Video shows the more simple Single Beam Install. Check out the XenonSupply Channel and watch the BI-Xenon Honda Civic Install video. This one shows how to install for both the low beam and high beam
so you dont have brights with those ones?
Is this a XenonSupply purchase? Please email Help(at)XenonSupply(dot) com with your sales order number and we will be able to verify your purchase with your vehicle year, make and model.
Thank you,
-XS Team
i purchased a ki but i wondered if they would fit in my projector headlights i just order everything on thurs what do you think
If this is a XenonSupply HID kit then likely the blue wire is the positive wire and the black wire is the ground wire. Is this for the Honda Civic? Id forward your vehicle specific questions to Help(at)XenonSupply(dot)com for better support.
replacement bulbs can be purchased at XenonSupply(dot)com or you can place an order over the phone at 1-800-840-3240
instead of a black and red wire i have a black and BLUE wire…does that mean the blue is positive and black is negative?
hey man where do you get replacement bulbs for this stuff?
You can electrical tape the Driver Side connector that is left unused by the bi-xenon wiring harness. Not a requirement but a good safety measure.
If you have additional questions please let us know at Help(at)XenonSupply(dot)com.
Thank you,
-XS team
any electrical taping needed?
@xVxRayJohnathaNxVx Not all kits use the same wires or same colors. You will need to test them each way to see which way works. XenonSupply kits have polarity protection in case they are plugged in incorrectly. We cannot say the same for other kits.
Mine has a red and a blue wire for the plug. So does that mean that the blue wire is the negative and of course the red wire is for the positive?
Please direct your inquiry to Help(at)XenonSupply(dot)com and we will be able to assist you futher. Please clarify in your response your DRL issue as we dont understand the exact problem you are having.
I got a 04 Acura EL or Honda civic same body style
I recently installed Bixenon HID for my headlight and 9006 HID for my fog lights.
HIDs work fine but i got none DRL light and my DRL light Flash is on figuring some way to fixed it any help would be nice of you…
THanks
What vehicle are you attempting to install HID’s in with DRL? There is no DRL for the Honda Civic until the 2006 model and that is on the high beam.
nice video buddy
but listen man can you make a video of how to use HID for DRL please?
cause it`s a major issue for Installing Hid in most of the cars that using DRl.
Thaks
The Rubber hosing will fit back on without modification to the wiring with a Xenon Supply kit.
same as mine. what i did is i took the housing off and sodered the wires that go from the bulb to the wiring that goes to the original housing.
when you did that top red black right..mine i did the same but i put electrical tape to cover it up so no water or dirt will come in contact
One quick tip IT is allways recomended to take the – off first and allways last on 🙂
I see he is taking the +
Do HB2(low) will fit 92 civic? since I just found out it was H4. But it was too late when I did order for HID kits.
is there any switch on it..? and is it gonna fit on my civic 97 dx coupe.?
how much would they run for?
Thanks for the reply. Yea I installed them for my girl friends civic and she has 8000k low beams but no high beams. It doesn’t really matter becuase the 8000k are so bright that you don’t really need high beams and by the time your high beams heat up you don’t need them any more. Its just nice to have. It feels weird riding around with just low beams.
You can purchase from XenonSupply(dot)com or email us at Help(at)XenonSupply(dot)com and we will gladly link you to the product shown in the video
If yours did not come with a harness it is likely not a bi-xenon kit and will either use halogen high beams or have no high beams.
where can i get some for a 2000 honda civic?