Well hell , i didnt have the bushing at 2 am yesterday , i put my smallest o ring on it and pressed it together , i suspect i better call them back to bring it back in , first im grabing a few bushing kits …hell i thought i lost something on a tranny transfer case r&r on a 2011 awd 1/2 ton van
This was exactly my problem! I actually checked under the vehicle first and I didn’t have to do the extra work under the steering wheel. Thanks a lot!!
2013 GMC Yukon, Part number 14104. The bushing is too soft. Easily pops of of the ball of Transmission lever. I think a hard plastic would have been better. My son picked the part up from Napa. Disappointed with this part made from Dorman.
So my truck did this yesterday to me I was tripping out it set me back to saying f*** my truck is done so I called a local tow truck tow truck guy came in about to pick my truck up he told me that I had a loose wire and I still gave that guy 80 bucks for his toe because he was honest with me
Mine just stop shifting a couple days ago and this video help me get the truck back and running. I was about to call a tow truck but I was like let me YouTube it first before I do that and luckily this person had made this video
){kind=link}
Does it works for 2010 thaoe 4×4 ?
Well hell , i didnt have the bushing at 2 am yesterday , i put my smallest o ring on it and pressed it together , i suspect i better call them back to bring it back in , first im grabing a few bushing kits …hell i thought i lost something on a tranny transfer case r&r on a 2011 awd 1/2 ton van
This was exactly my problem! I actually checked under the vehicle first and I didn’t have to do the extra work under the steering wheel. Thanks a lot!!
I was stranded and I was able to fix my truck with this video, thx.
Thanks you've saved my week
Gracias amigo me ayudaste mucho
Always check under the vehicle first to see if the cable is disconnected because you don’t have to take anything apart.
Does the bushing snap on or it stays kinda loose?
where did you get the bushing from I need 1 for my chevy silverado 2011
Amazing. Saved me!!
How did you remove the old bushing?
2013 GMC Yukon, Part number 14104. The bushing is too soft. Easily pops of of the ball of Transmission lever. I think a hard plastic would have been better. My son picked the part up from Napa. Disappointed with this part made from Dorman.
Issue just happened to my 2011 suburban. Thought it was the transmission but it wasn’t. Thanks for the video. Very helpful!!
i checked the part number but it says doesn’t fit tahoe, i think its for trailblazer
So my truck did this yesterday to me I was tripping out it set me back to saying f*** my truck is done so I called a local tow truck tow truck guy came in about to pick my truck up he told me that I had a loose wire and I still gave that guy 80 bucks for his toe because he was honest with me
I was able to push it on, it doesn't hold in place anymore
Thanks so much for posting. This is what happened to my 2009 Chevy Silverado 2500 and your video helped solve the problem
Great video. I didn't need a C-clamp, just a strong grip to push the bushing into place.
Mine just stop shifting a couple days ago and this video help me get the truck back and running. I was about to call a tow truck but I was like let me YouTube it first before I do that and luckily this person had made this video
When you add the white bushing with the C clamp i missed you adding the outside E clip?