Buy Now!
New Wheel Cylinder from 1AAuto.com http://1aau.to/ia/1ABMC00073
A wheel cylinder is the hydraulic component of a drum brake system. If your drum brake vehicle is leaking brake fluid, or the brakes are seized, this is where to look. This video shows you how to install a new wheel cylinder on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: https://www.youtube.com/playlist?list=PLJVpHWuCEUX82IMJQQ2BJVfv1GZfau7Mp
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
They make line wrenchs specificly for that so you don't crush your lines.
Thanks for the video . I did the same but my wheel cylinder is not moving at all removed two bolts with the bleeder and disconnected the line it's stuck tried to hit it with rubber hammer didn't work im afraid to break something so im stuck any help ? C1500 suberban 99 RWD
Why would you not want to use locking pliers instead of wire pliers to close off the rubber brake hose? I imagine if you’re careful to not over tighten, it should be fine right?